Anything that contains Kinetic energy is in some type of motion, whether it is one-dimensional, two-dimensional, rotational motion, etc. Kinetic energy is responsible for motion, and it is already known that the motion of any object happens because of some external force, the inertia present in the objects does not allow them to move or stop on their own, therefore, some external force is required to provide some kinetic energy to the object, and providing energy itself states that the object has some velocity. There can be several types of velocities an object in motion can have, and explaining the characteristic of velocity w.r.t time is easier graphically.
Velocity of an object
The velocity of an object can be defined as the rate of change of displacement, or it can also be defined as the change in the object's position according to a given frame of reference with respect to time. The velocity of an object is a vector quantity, which means. Velocity has both magnitude and direction to it and this is how it differs from speed, as the speed of an object does not contain direction.
| SI unit | m/sec |
| symbol | v |
| Dimension | LT-1 |
Velocity- Time Graphs
To draw velocity-time graphs, we will use the three equations of motions
Velocity-Time graph is very important while learning about the motion of any object, the graph tells about the acceleration of the object. Depending upon the different types of velocities, for example, an object may have a constant velocity, increasing velocity, or decreasing velocity, it can easily be determined if the object is accelerating, decelerating, or not accelerating at all.
Read More, Rate of change of Motion
Case 1: Velocity - time graphs with Constant Velocity (No Acceleration)
When the Velocity of an object is the same through its motion, the initial and final velocity remains the same and the object will have some initial velocity and cannot have zero initial velocity, the slope of the velocity-time graph obtained is constant.
The constant slope represents no increase or decrease in the acceleration of the object. Hence, the object has zero acceleration in this case.
In the graph shown below, the x-axis represents time, the y-axis represents the velocity. The acceleration is zero and hence, the equations of Motion are not applicable here, the simple formula given above is used to find out the velocity of the object.
Also Read, Graphical Representation of Motion
Case 2: Velocity -time graphs with Increasing Velocity (Constant Acceleration)
When the velocity of an object is increasing throughout the motion, the final velocity becomes more than the initial velocity, the initial velocity, in this case, can be zero as well, since the object is constantly increasing its speed.
The slope of the velocity-time graph obtained in this case is increasing in nature, the increasing slope tells that the body is in constant acceleration.
The x-axis on the graph represents time and the y-axis represents the velocity. The equations of motion are applicable in this to find out the parameters of the object in motion since the equations are allowed for objects undergoing constant acceleration.
Case 3: Velocity -Time Graph with increasing Acceleration.
When the rate of change of velocity is increasing throughout the motion, the final velocity will be much more than the initial velocity, The initial velocity in this case as well can be zero since the object's acceleration is increasing every second at some rate.
The slope of the velocity-time graph in this case will take the form of a curve, The curve in the slope shows that the body has increasing/decreasing acceleration.
The x-axis on the graph represents time and the y-axis represents velocity. The slope at any point of the graph will give the value of acceleration at that point.
Note: Just like increasing velocity-time graph, there can be decreasing velocity-time graph where the slope is decreasing since the velocity is decreasing in nature, and just like the increasing acceleration graph, there exist graph for decreasing acceleration as well with a negative slope curve since the object is undergoing the rate of change of deceleration.
Practice Problems on Velocity Time Graphs
Question 1: Draw the graph for an object starting at a velocity of 20m/sec and the final velocity becomes 0 m/sec at T=10th second. The object is decelerating in nature.
Solution:
The graph will have a negative slope since the object is deceleration in nature.
Velocity-time graph
Question 2: An object with an initial velocity of 15m/sec is decelerating and ultimately coming to a stop at T= 20 seconds, Find the Displacement covered by the object.
Solution:
The displacement of the object can be found out by finding the area of the velocity-time graph.
The graph given forms a right angle triangle and the area of this right angle triangle will give the displacement covered by the object.
Area of the right angle triangle= Displacement of the object= 1/2× Base × Height
Displacement= 1/2 × 20× 15
Displacement = 150 meters.
Question 3: Find the Acceleration of the object which is constant in nature, The graph for the object's velocity is given below.
Solution:
The acceleration in the velocity-time graph is found out through the slope, the slope is the ratio of the value at y-axis and x-axis, solving this will easily give the value of acceleration of the object.
At time T= 8 sec, the value of the velocity of the object is 8 m/sec.
Hence, the slope of the graph at T= 10 sec will be,
Slope of the graph= Acceleration of the object = 8/10
Acceleration = 0.8 m/sec2
Question 4: Alakh decides to go on a short bike ride for 10 minutes. He was riding with a constant acceleration of 2 m/sec2, What is the find velocity of Alakh's bike by the end of the ride?
Solution:
Applying first Equation of Motion to find out the velocity of Alakh's bike,
v = u + at
Here, the initial velocity (u)= 0 m/sec
Acceleration (a)= 2 m/sec2
Time = 10 minutes = 600 seconds
v = 0+ 600× 2
v = 1200m/sec2
Question 5: Tinkesh walks from his office to his home in 30 minutes and the displacement from the office to home is 2 kilometers. Find the value of the constant velocity at which Tinkesh is walking.
Solution:
It is known that the velocity of any person/object is the rate of change of its displacement.
Therefore, Velocity= displacement/Time
Given, displacement = 2km = 2000 meters
Time = 30 minutes = 1800 seconds.
Velocity = 2000/1800
Velocity = 1.11m/sec
Question 6: Two objects are moving at a speed of 20m/sec and 40m/sec in order to reach the same destination which was 8000 meters away from the starting point of both the objects. Find the time taken by both objects.
Solution:
Time taken by the first object (T1)= displacement/Velocity
T1 = 8000/20
T1 = 400seconds
T1 = 400/60 = 20/3 minutes.
Time taken by the second object (T2) = 8000/40
T2 = 200 seconds
T2 = 200/60 minutes
T2 = 10/3 minutes
Similar Reads
CBSE Class 9 Physics Notes 2023-24 CBSE Class 9 Physics Notes 2023-24 is a comprehensive guide for CBSE class 9 Students. The Class 9 Syllabus is Designed to provide Students with a strong foundation in the basic principle of physics including Force, Law of Motion, Gravitation and Sound, and to encourage them to think scientifically.
6 min read
Chapter 1: Motion
Measuring the Rate of MotionWe use general things around us that are moving, like if we see around us, monitor air moving around us, like we have clocks with the hands moving, we all know that day and night is caused because of motion of Earth around the Sun, yet seasons are caused because of it. So we are going to study in de
10 min read
Velocity - Time GraphsAnything that contains Kinetic energy is in some type of motion, whether it is one-dimensional, two-dimensional, rotational motion, etc. Kinetic energy is responsible for motion, and it is already known that the motion of any object happens because of some external force, the inertia present in the
7 min read
Equation of Motion by Graphical MethodA famous British scientist Isaac Newton derived three equations of motion that describe the most fundamental concepts of motion of an object. These equations govern the motion of an object in one, two, and three dimensions. These equations are easily used to calculate the values or the expressions f
12 min read
Uniform Circular MotionUniform Circular Motion as the name suggests, is the motion of a moving object with constant speed in a circular path. As we know, motion in a plane only has two coordinates, either x, and y, y and z, or z and x. Except for Projectile motion, circular motion is also an example of motion in a 2-D pla
9 min read
Chapter 2: Force and Laws of Motion
Force - Definition, Effects, Types, Sample ProblemsIn everyday life, we often notice that some effort is required to set an object in motion or to bring a moving object to a stop. This effort is experienced as a muscular force, where we push, pull, or hit the object to change its state of motion. Therefore, Force can be defined as a push, pull, or i
12 min read
Balanced and Unbalanced ForcesForces are required to move, turn, shift, release, shut, drive, drag, and so on. When you throw a ball, you are exerting energy on it to propel it through the air. A push or pull is referred to as a force. Forces can cause objects to move, and they can also slow, stop, or change the direction in whi
8 min read
Newton's First Law of MotionBefore the revolutionary ideas of Galileo and Newton, people commonly believed that objects naturally slowed down over time because it was their inherent nature. This assumption stemmed from everyday observations, where things like friction, air resistance, and gravity seemed to slow moving objects.
15+ min read
Mass and InertiaMany events are seen in the field of physics, yet some of them have eluded explanation for a long time. Newton proposed three rules of motion, which became known as Newton's Laws of Motion. These laws were a novel finding in the physical universe, and they were frequently employed to explain situati
8 min read
Newton's Second Law of Motion: Definition, Formula, Derivation, and ApplicationsNewton's Second Law of Motion is a fundamental principle that explains how the velocity of an object changes when it is subjected to an external force. This law is important in understanding the relationship between an object's mass, the force applied to it, and its acceleration.Here, we will learn
15 min read
Law of Action and ReactionLaw of Action and Reaction is the other name for Newton's Third Law of Motion. There are three basic laws given by famous English Physicist Isaac Newton that are helpful in defining the motion of any object in an inertial frame of reference. The third law of Newton is also called the Law of Action a
11 min read
Conservation of MomentumAssume a fast truck collides with a stopped automobile, causing the automobile to begin moving. What exactly is going on behind the scenes? In this case, as the truck's velocity drops, the automobile's velocity increases, and therefore the momentum lost by the truck is acquired by the automobile. Wh
12 min read
Chapter 3: Gravitation
Newton's Universal Law of GravitationWhether or not that apple actually landed on Isaac Newton's head, as some stories would have it, this equation given by universal law of gravitation describes why everyone stays rooted to the ground, what locks the Earth in orbit around the sun, and to send men to the moon. It summarizes the idea th
7 min read
Kepler's Laws of Planetary MotionKepler's law of planetary motion is the basic law that is used to define the motion of planets around the stars. These laws work in parallel with Newton's Law and Gravitation Law and are helpful in studying the motion of various planetary objects. Kepeler's law provides three basic laws which are, K
10 min read
Acceleration due to GravityAcceleration due to gravity (or acceleration of gravity) or gravity acceleration is the acceleration caused by the gravitational force of attraction of large bodies. As we know that the term acceleration is defined as the rate of change of velocity with respect to a given time. Scientists like Sir I
8 min read
What is the Acceleration due to Gravity on Earth ?Take something in your hand and toss it down. Its speed is zero when you free it from your grip. Its pace rises as it descends. It flies faster the longer it goes. This sounds like acceleration. Acceleration, on the other hand, implies more than just rising speed. Pick up the same object and throw i
11 min read
Mass and WeightMass and Weight are commonly used in the same manner by the general masses but there are differences between both Mass and Weight, where Mass is the measure of Inertia unlike Weight which is a measure of force acting on a body towards the heavy body. But yet still many people use these two terms int
10 min read
Buoyant ForceBuoyancy is a phenomenon due to the buoyant force that causes an object to float. When you put an object in a liquid, an upward force is exerted on the object by the liquid. This force is equal to the weight of the liquid that has been displaced. The amount of liquid that has been displaced depends
13 min read
Relative DensityDensity is defined as the amount of mass in a unit volume of matter, for every substance has a different density. Here, we will cover what relative density is, calculations related to relative density, and the density of various substances. Observe how the different liquids form different layers. Th
12 min read
Chapter 4: Work and Energy
Work - Definition, Formula, Types of Work, Sample ProblemsIn daily life, you are doing activities like study, running speaking, hear, climbing, gossips with friends and a lot of other things. Do you know? All these activities require some energy, and you get it from your daily food. In our day-to-day life, everyone eats food, gets energy, and does some act
6 min read
EnergyEnergy in Physics is defined as the capacity of a body to do work. It is the capacity to complete a work. Energy can be broadly categorized into two categories, Kinetic Energy and Potential Energy. The capacity of an object to do the work is called the Energy. In this article, we will learn about, E
10 min read
Kinetic EnergyKinetic Energy is the energy associated with an object moving with a velocity. For an object of mass m and velocity, its kinetic energy is half of the product of the mass of the object with the square of its velocity. In our daily life, we observe kinetic energy while walking, cycling, throwing a ba
10 min read
Potential EnergyPotential energy in physics is the energy that an object possesses as a result of its position. The term Potential Energy was first introduced by a well-known physicist William Rankine, in the 19th century. Gravitational Potential Energy, the elastic potential energy of an elastic spring, and the el
8 min read
PowerPower in Physics is defined as the time rate of the amount of energy converted or transferred. In the SI system (or International System of Units), Watt (W) is the unit of Power. Watt is equal to one joule per second. In earlier studies, power is sometimes called Activity. Power is a scalar quantity
8 min read
Commercial Unit of EnergyIn daily life, from moving to completing a task, humans keep on getting some work done all the time. However, how to define the term 'work' in Physics? A man is walking, is this Work? Someone pushing a wall, will this be called a work done? Well, in real life, perhaps, both the examples look like th
6 min read
Chapter 5: Sound
Production and Propagation of SoundHave you ever wonder how are we able to hear different sounds produced around us. How are these sounds produced? Or how a single instrument can produce a wide variety of sounds? Also, why do astronauts communicate in sign languages in outer space? A sound is a form of energy that helps in hearing to
6 min read
Sound Needs a Medium for PropagationWithout sound life is a little tough, isn't it? Like imagine watching a horror movie without sound you will realize that the scary movie becomes a funny video compilation. We are totally connected to sound, from morning to our bedtime we hear several sounds some sounds good but at the same time, som
6 min read
What are the Characteristics of Sound Waves?Sound is nothing but the vibrations (a form of energy) that propagates in the form of waves through a certain medium. Different types of medium affect the properties of the wave differently. Does this mean that Sound will not travel if the medium does not exist? Correct. It will not, It is impossibl
7 min read
Speed of SoundSpeed of Sound as the name suggests is the speed of the sound in any medium. We know that sound is a form of energy that is caused due to the vibration of the particles and sound travels in the form of waves. A wave is a vibratory disturbance that transfers energy from one point to another point wit
12 min read
Reflection of SoundReflection of Sound is the phenomenon of striking of sound with a barrier and bouncing back in the same medium. It is the most common phenomenon observed by us in our daily life. Let's take an example, suppose we are sitting in an empty hall and talking to a person we hear an echo sound which is cre
9 min read
Reflection of SoundReflection of Sound is the phenomenon of striking of sound with a barrier and bouncing back in the same medium. It is the most common phenomenon observed by us in our daily life. Let's take an example, suppose we are sitting in an empty hall and talking to a person we hear an echo sound which is cre
9 min read
Explain the Working and Application of SONARSound energy is the type of energy that allows our ears to sense something. When a body vibrates or moves in a ‘to-and-fro' motion, a sound is made. Sound needs a medium to flow through in order to propagate. This medium could be in the form of a gas, a liquid, or a solid. Sound propagates through a
8 min read
Human EarIt has been discovered that sound is a type of energy. Vibrations cause it to happen. Longitudinal waves are sound waves. Because they are elastic waves, they must be transmitted through a material medium. They can move through solids, liquids, and gases. In solids, their velocity is greatest, where
8 min read