Some Important Compounds of Carbon and Silicon
Last Updated : 20 Nov, 2021
Silicon belongs to the same family of elements as Carbon in the periodic table, but its chemical reactivity differs significantly from that of similar carbon compounds. In its most stable form, silicon, like carbon, can easily attach to four substituents. Silicon, on the other hand, is more electropositive than carbon, does not form stable double bonds, and may undergo a variety of unique chemical reactions that improve its efficiency as an adhesion promoter component. It is possible to manufacture a silicon molecule with dual reactivity, that is, a molecule with both organic and inorganic reactivities.
Carbon
Carbon a is nonmetallic and tetravalent, meaning that it can form covalent chemical bonds with four electrons and is part of Group 14 of the periodic table.
Carbon accounts for only about 0.025% of the Earth's crust. Carbon is the 15th most prevalent element in the Earth's crust and the universe's fourth most abundant element by mass.
Carbon is a prevalent element in all known life because of its abundance, remarkable diversity of organic compounds, and extraordinary ability to form polymers at common Earth temperatures. Carbon is a chemical element with the atomic number 6 and the symbol C.
Properties of Carbon
- Carbon is a one-of-a-kind element. It can show up in a variety of ways. Coal and soot are two examples of pure forms of carbon.
- It is a soft, dull grey or black colour.
- Charcoal is one of the most important carbon compounds, and it is formed when carbon is heated in the absence of air.
- It exists in a variety of allotropic forms. Diverse versions of an element with different physical and chemical properties are known as allotropes.
- The density of various forms of carbon varies according to their origin. There are pure forms of carbon and non-pure forms of carbon, such as coal, which is a mixture of carbon and hydrogen.
Compounds of Carbon
When it comes to carbon, we already have a good understanding of its compounds. Carbon dioxide and carbon monoxide are essential carbon molecules, to be sure. We know how they're made, how they're put together, and how they're used. Let's have a look at some complicated carbon compounds in this section. We can also refer to them as organic compounds.
Ethanol is also known as ethyl alcohol. It is commonly referred to as alcohol or spirit. It primarily consists of alcoholic beverages. This organic compound is used in the production of medicines such as tincture iodine, cough syrup, and so on. However, pure ethanol should never be consumed because it can be fatal.
Ethanoic acid is also known as acetic acid. It has a melting point of 290K. Because this compound freezes in the winter, we call it glacial acetic acid. The vinegar we drink is an acetic acid solution in water that ranges from 5% to 8%. It's also used to keep pickles fresh.
Carbon dioxide is a chemical element present in the atmosphere. It is a gas at room temperature. One carbon atom and two oxygen atoms make it up. Carbon dioxide is emitted when humans and animals exhale. It is a greenhouse gas found in trace amounts in the Earth's atmosphere. When it is solid, it is known as dry ice. Carbon dioxide is emitted into the atmosphere as a result of human activity. When hydrocarbon fuels are burned, carbon dioxide is released into the atmosphere. During combustion or burning, carbon from fossil fuels reacts with oxygen in the air to produce carbon dioxide and water vapour.
Some important Functions of Carbon dioxide are as follows:
- Carbon is the primary component of proteins, lipids, nucleic acids, and carbohydrates. Carbon's molecular structure enables it to bond with a wide range of elements in various ways. The carbon cycle depicts how carbon moves through the living and non-living components of the environment.
- Carbon dioxide is the most significant greenhouse gas emitted by human activity. Carbon is the primary component of proteins, lipids, nucleic acids, and carbohydrates. Carbon's molecular structure enables it to form bonds with a wide range of elements in various ways. The carbon cycle depicts the movement of carbon in the world, including both living and non-living carbon.
- Carbon dioxide is required for both photosynthesis and respiration, two essential plant and animal processes. Green plants convert carbon dioxide and water into food compounds such as glucose and oxygen. This process is known as photosynthesis.
When natural methane reaches the surface of the atmosphere, it is referred to as atmospheric methane, and it can be found both beneath the seafloor and beneath the ground. It has no colour and is odourless or has a sweet oil-like odour. It is a non-toxic, flammable gas. It is a tetrahedral molecule with four C-H bonds that are equivalent. Colonic anaerobes produce it.
Silicon
Silicon is a tetravalent metalloid and semiconductor that is a hard, brittle crystalline solid with a blue-grey metallic lustre. It belongs to Group 14 in the periodic table. It is not overly reactive. Its oxides belong to the silicate anions family.
Silicon is the 8th most common element in the universe by mass, but it is extremely rare in the Earth's crust as a pure element. It is most abundant in space as various forms of silicon dioxide (silica) or silicates in cosmic dust, planetoids, and planets.
Silicon is a chemical element with the atomic number 14 and the symbol Si. Quartz, cristobalite, and tridymite are crystalline forms of silica that are interconvertible when heated to the right temperature. Silicon dioxide is a covalent compound that is tetrahedrally linked to four oxygen atoms.
Properties of Silicon
- Silicon may be found in combination with other elements, such as oxygen.
- Silicates are rocks that have both silicon and oxygen.
- It is a greyish crystal with a metallic appearance after it has been decontaminated.
- Although it appears to be made of metal, it is not.
Compounds of Silicon
The most abundant compounds in the earth's crust are silica and silicates (around 95%). Silicon dioxide, also known as silica, exists in a variety of crystallographic forms. Quartz and cristobalite are two crystalline forms of silica that are interconvertible when heated to the appropriate temperature. Silicon dioxide is covalent in nature and is tetrahedrally attached to four oxygen atoms.
Silicon Dioxide is the chemical name for silicon oxide. Silica, Silicic oxide, and silicic acid are other names for it. It can be found in nature as quartz. It is obtained as a transparent to grey powdered form, either crystalline or amorphous. It is an odourless and flavourless compound.
Uses of SiO2 are:
- In the construction industry, silicon dioxide is used to make concrete.
- It is used in hydraulic fracturing in its crystalline form.
- It is used in the production of glass as well as the production of elemental silicon.
- In powdered foods such as spices, it is used as an anti-caking agent.
- In juice, beer, and wine, it is used as a fining agent.
Health hazards of SiO2 are: Silica is non-toxic when consumed orally. Inhaling finely divided crystalline silica dust can cause bronchitis, lung cancer, or silicosis due to dust lodgement in the lungs. Fine silica particles inhaled in sufficient quantities increase the risk of rheumatoid arthritis and lupus.
It's a class of organosilicon polymers with repeating units. The starting materials for the production of silicones are alkyl or aryl substituted silicones. As we all know, silicones are surrounded by a nonpolar alkyl group that repels water in nature. They are resistant to oxidation and chemicals and have high thermal stability. This compound has a wide range of applications because it is used as an electrical insulator as well as in surgical procedures.
Sample Questions
Question 1: Is methane gas harmful to humans?
Answer:
Methane is not toxic on its own, but it can be lethal when combined with other gases. Methane displaces oxygen, resulting in asphyxiation. It can cause dizziness and headaches, but these symptoms often go unnoticed until the brain signals the body to gasp for air.
Question 2: Is methane a fossil fuel?
Answer:
Fossil fuels range from volatile materials with low carbon-to-hydrogen ratios (such as methane) to liquids (such as petroleum) to nearly pure carbon-composed non-volatile materials such as anthracite coal. Methane can be found in hydrocarbon fields alone, in combination with oil, or as methane clathrates.
Question 3: What are the benefits of carbon dioxide?
Answer:
According to studies, increased carbon dioxide concentrations increase photosynthesis, which promotes plant growth. Although higher levels of CO2 in the atmosphere are beneficial to plants, they are also the primary cause of climate change.
Question 4: Why is carbon dioxide important to the human body?
Answer:
Internal respiration in the human body necessitates the presence of carbon dioxide. Internal respiration is a mechanism that transports oxygen to body tissues while also removing carbon dioxide. Carbon dioxide protects the blood's pH, which is necessary for life.
Question 5: How is silicon dioxide produced?
Answer:
The majority of silicon dioxide is obtained through mining activities such as sand extraction and quartz purification. Chemical processing is required to make a more acceptable product (for example, more reactive or fine-grained) purer or otherwise. Quartz is suited for a wide range of applications. Silica fume is produced as a byproduct of hot processes such as ferrosilicon processing.
Similar Reads
Chapter 1 Some Basic Concepts of Chemistry
Importance of Chemistry in Everyday LifeImportance of Chemistry in Everyday Life: The scientific study of matter's properties and behavior is known as chemistry. It is a natural science that studies the elements that makeup matter, as well as the compounds, made up of atoms, molecules, and ions: their composition, structure, qualities, an
10 min read
Molecular Nature of Matter - Definition, States, Types, ExamplesThe distinct forms that different phases of matter take on is called the state of matter. The most common state matter that is easily observable in daily life is - Solid, liquid, gas and plasma. There are many other states known to us like - Bose-Einstein condensate and neutron degenerate matter, bu
9 min read
Properties of MatterEvery matter has its own set of properties. Physical and chemical properties can be used to classify these properties. Physical properties are those that may be measured or observed without affecting the substance's identity or composition. Physical properties include odor, color, density, and so on
9 min read
System of UnitsMeasurement forms the fundamental principle to various other branches of science, that is, construction and engineering services. Measurement is defined as the action of associating numerical with their possible physical quantities and phenomena. Measurements find a role in everyday activities to a
9 min read
Mass and WeightMass and Weight are commonly used in the same manner by the general masses but there are differences between both Mass and Weight, where Mass is the measure of Inertia unlike Weight which is a measure of force acting on a body towards the heavy body. But yet still many people use these two terms int
10 min read
Significant FiguresIn order to find the value of different sizes and compare them, measurement is used. Measuring things is not only a concept but also practically used in everyday life, for example, a milkman measures milk before selling it in order to make sure the correct amount is served, A tailor always measures
7 min read
Laws of Chemical CombinationLaws of Chemical Combination are one of the most fundamental building blocks of the subject of chemistry. As in our surrounding different matter reacts with each other and form various kind of different substances. Laws of Chemical Combination are the collection of laws that explains how these subst
7 min read
Law of Conservation of MassLaw of Conservation of Mass: The law of conservation of mass states that the mass can neither be created nor destroyed in a chemical reaction. This implies, in a closed system the mass of the elements involved initially in a chemical reaction is equal to the mass of the product obtained by the react
9 min read
Laws of Chemical CombinationLaws of Chemical Combination are one of the most fundamental building blocks of the subject of chemistry. As in our surrounding different matter reacts with each other and form various kind of different substances. Laws of Chemical Combination are the collection of laws that explains how these subst
7 min read
Gay Lussac's LawGay Lussac's is one of the Ideal gas laws that relates the pressure of the gas with its absolute temperature when its volume is kept constant. The basic statement of Gay Lussac’s Law is, the pressure produced by a gas is directly proportional to its temperature if mass and volume are kept fixed. Gay
6 min read
Dalton's Atomic TheoryIn the year 1808, the English scientist and chemist John Dalton proposed Dalton's atomic hypothesis, a scientific theory on the nature of matter. It asserted that all matter is made up of atoms, which are tiny, indivisible units. According to Dalton's atomic theory, all substances are made up of ato
8 min read
Atomic MassAtomic mass is the total mass of all subatomic particles of an atom, including protons, neutrons, and electrons. However, the mass of electrons is incredibly small, so it's typically neglected when determining an atom's overall mass. The unit commonly used to express atomic mass is the Atomic Mass U
9 min read
Molecular MassMolecular Mass is the mass of all the atoms present in a molecule. In ancient India and Greece, philosophers have first given the idea of atoms and deeply studied them. Around 500 BC.Everything around is made up of very small units these units are atoms in the language of science, very small in the
8 min read
Formula Mass of Ionic CompoundsThere are many known compounds and molecules. The compounds made up only of ions are called ionic compounds. The concept of the formula unit of ionic compounds and the formula mass helps find the atomic masses of the ionic compounds. The formula mass is then calculated in the same way in which the m
6 min read
Percentage Composition - Definition, Formula, ExamplesDifferent constituent elements make up any chemical compound. In some chemical reaction calculations, you'll need to figure out how much of a certain element is in a specific compound. Or, in order to understand the contribution of a specific element in any of the stoichiometric calculations of a ch
5 min read
Stoichiometry and Stoichiometric CalculationsJeremias Richter, a German chemist, was the first to create or discover the word Stoichiometry. The quantitative analysis of the reactants and products involved in a chemical reaction is known as chemical stoichiometry. The name "stoichiometry" comes from the Greek words "stoikhein" (element) and "m
7 min read
Chapter 2 Structure of Atom
Discovery of ElectronsThe basic idea of the discovery of the elementary particles was generated by Dalton's Atomic Theory. John Dalton in 1808 gave the first scientific theory about atoms, in which, he stated that atoms are the smallest particle of any matter. They are indivisible and indestructible. According to Dalton
7 min read
What is a Proton?Protons are the fundamental particles that reside inside the nucleus of any atom. They are the positive charge particle and are responsible for balancing the negative charge of the electron to make the atom electrically neutral. Proton was discovered by the famous scientist Ernest Rutherford. Atoms
6 min read
NeutronsNeutrons are fundamental subatomic particles of the atom. An atom is made up of electrons, protons and neutrons. James Chadwick, an English physicist, discovered the neutron in 1932. Neutrons are particles with no charge and higher mass. They are represented by n. They reside inside the nucleus of t
8 min read
Thomson's Atomic ModelThomson's Atomic Model is one of the fundamental models of the atom that tries to explain the working and structure of the atom. this model was proposed by famous Scientist JJ Thomson in 1904. Thomson during his cathode ray experiment proved the existence of a negatively charged particle called elec
6 min read
Rutherford Atomic ModelRutherford Atomic Model was proposed by Ernest Rutherford in 1911. It is also called the Planetary Model of the Atom. It introduced the concept of a dense, positively charged nucleus at the center of an atom, with electrons orbiting around it, forming the basis for modern atomic theory. In this arti
6 min read
Mass NumberMass Number of an atom is the total number of protons and neutrons present in an atom. We know that an atom consists of electrons, protons, and neutrons but the mass of the atom is contributed by protons and neutrons as the mass of electrons is very low hence it doesn't contribute to the mass of an
11 min read
Bohr's Model of an AtomBohr's Model is an atomic model proposed by Danish Physicist Niels Bohr in 1913. According to this model, in an atom, the electrons revolve around the nucleus in definite energy levels called orbits/shells. This model provides a basic understanding of the concept of the atom and its constituents. Le
8 min read
Planck's Quantum FormulaMaxwell's proposal concerning the wave nature of electromagnetic radiation was useful in describing phenomena such as interference, diffraction, and other phenomena as science progressed. However, he was unable to explain a number of other observations, including the nature of radiation emission fro
7 min read
Atomic SpectraAtomic Spectra is the spectrum of radiation of electromagnetic waves produced due to the transition of an electron from one energy level to another level within an atom. Atoms have an equal number of negative and positive charges. Atoms were described as spherical clouds of positive charges with emb
9 min read
Spectrum of the Hydrogen AtomElectrons in a hydrogen atom circle around a nucleus. Because of the electromagnetic force between the proton and electron, electrons go through numerous quantum states. Neil Bohr's model helps in visualizing these quantum states as electrons orbit the nucleus in different directions. When Electrons
7 min read
Bohr's Model of the Hydrogen AtomThe Bohr model of the hydrogen atom was the first atomic model to successfully explain the atomic hydrogen radiation spectra. Niels Bohr proposed the atomic Hydrogen model in 1913. The Bohr Model of the Hydrogen Atom attempts to fill in some of the gaps left by Rutherford's model. It has a special p
9 min read
Quantum Mechanical Atomic ModelSchrödinger used the electron's wave-particle duality to design and solve a difficult mathematical equation that precisely represented the behaviour of the electron in a hydrogen atom in 1926. The solution to Schrödinger's equation yielded the quantum mechanical model of the atom. The quantization o
8 min read
Quantum NumbersQuantum numbers in Chemistry, are the sets of numbers that describe an electron's orbit and movement within an atom. When the quantum numbers of all the electrons in a given atom are added together, they must satisfy the Schrodinger equation. Quantum numbers are the set of numbers used to describe t
12 min read
Electronic Configuration in Periods and GroupsElectronic Configuration is the arrangement of electrons in orbitals around an atomic nucleus. Electronic Configuration of a molecule refers to the distribution of electrons in various molecular orbitals. The number of electrons in bonding and antibonding molecular orbitals of a molecule or molecula
9 min read
Chapter 3 Classification of Elements and Periodicity in Properties
Dobereiners Triads - Definition, Types, LimitationsSince ancient times, there have been various attempts to classify the elements into groups according to their properties. As the new elements were discovered, a number of theories came up to classify the elements. Various scientists used various approaches and facts to justify their classification.
5 min read
Newland’s Law of OctavesNewland's Law of Octaves also called Law of Octaves was one of the initial attempts to arrange all the known chemical elements in a table to make their study better. In Newland's Law of Octaves, elements are arranged in the increasing order of their atomic mass and it is seen that the property of th
6 min read
Modern Periodic LawAll matter in our environment is made up of basic units known as elements. Initially, only 31 chemical elements were discovered in 1800 and it was easier to study their chemical and other properties. However, as more and more elements were discovered due to technological advancements in science, it
6 min read
Nomenclature of Elements with Atomic Number above 100The contemporary periodic table has around 118 elements. In most cases, the element's discoverer is given the honour of naming the element. The chemical element's name is derived from its physical or chemical properties, its origin, or mythical qualities. The IUPAC then approves the preferred name o
5 min read
Electron ConfigurationElectron Configuration of an element tells us how electrons are filled inside various orbitals of the atom. The distribution of electrons inside various orbital of atoms is very useful in explaining various properties of the atoms and their combination with other atoms. The electron configuration of
8 min read
p-Block Elements - Definition, Properties, Uses, ExamplesSome metals, all nonmetals, and metalloids are among these elements. Normal or representative elements are s-block and p-block elements combined (except zero group elements). Each periodic table period concludes with a member of the zero group (18th group), i.e. a noble gas with a closed shell ns2np
7 min read
Electronic Configuration of the d-block ElementsElectronic Configuration of the d-block elements are those that can be found in the contemporary periodic table from the third to the twelfth groups. These elements' valence electrons are located in the d orbital. d-block elements are sometimes known as transition elements or transition metals. The
7 min read
Chapter 4 Chemical Bonding and Molecular Structure
Ionic BondIonic Bond is a bond that is formed by the electrostatic force of attraction between atoms. In an ionic bond, a complete transfer of electrons takes place in the process of bond formation. This bond is formed by the attracting force between the cations and the anions that are formed by the donating
8 min read
Bond Parameters - Definition, Order, Angle, LengthSeveral bond parameters, such as bond length, bond angle, bond order, and bond energy, can be used to characterize covalent bonds (also known as bond enthalpy). These bond parameters provide information about the stability of a chemical compound as well as the strength of the chemical bonds that hol
7 min read
VSEPR TheoryVSEPR Theory tells us about the basic structure of the molecules based on the force of repulsion between lone pair and bond pair of electrons. It states that any molecule arranged in such a structure minimizes the repulsion between the lone pair and bond pair of the molecule. Let's learn more about
9 min read
Valence Bond TheoryValence bond theory (VBT) describes the formation of covalent bonds and the electronic structure of molecules. It assumes that electrons occupy atomic orbitals of individual atoms within a molecule, and that the electrons of one atom are attracted to the nucleus of another atom. VBT states that the
7 min read
HybridizationThe concept of hybridization is defined as the process of combining two atomic orbitals to create a new type of hybridized orbitals. This intermixing typically results in the formation of hybrid orbitals with completely different energies, shapes, and so on. Hybridization is primarily carried out by
7 min read
Molecular Orbital TheoryThe Molecular Orbital Theory is a chemical bonding theory developed at the turn of the twentieth century by F. R. Hund and R. S. Mulliken to explain the structure and properties of various molecules. The valence-bond theory failed to adequately explain how certain molecules, such as resonance-stabil
7 min read
Hydrogen BondingIn chemistry, a hydrogen bond is an electrostatic force of attraction between a hydrogen atom and another electronegative atom. It is a special type of dipole-dipole force. Hydrogen bonding is the phenomenon of the formation of Hydrogen Bonds. H Bonds are stronger than any dipole-dipole bonds but we
13 min read
Chapter 5 States of Matter
Intermolecular Forces - Definition, Types, Equations, ExamplesCharacteristics of chemical systems are observable when they represent the bulk properties of matter. For example, an individual molecule does not boil, while a bulk boils. Collections of water molecules have wetting properties while individual molecules do not. Water, just like all matter, can exis
8 min read
Intermolecular Forces - Definition, Types, Equations, ExamplesCharacteristics of chemical systems are observable when they represent the bulk properties of matter. For example, an individual molecule does not boil, while a bulk boils. Collections of water molecules have wetting properties while individual molecules do not. Water, just like all matter, can exis
8 min read
Intermolecular Forces - Definition, Types, Equations, ExamplesCharacteristics of chemical systems are observable when they represent the bulk properties of matter. For example, an individual molecule does not boil, while a bulk boils. Collections of water molecules have wetting properties while individual molecules do not. Water, just like all matter, can exis
8 min read
Intermolecular Forces - Definition, Types, Equations, ExamplesCharacteristics of chemical systems are observable when they represent the bulk properties of matter. For example, an individual molecule does not boil, while a bulk boils. Collections of water molecules have wetting properties while individual molecules do not. Water, just like all matter, can exis
8 min read
Gas LawsGas Laws, When the conditions are normal, all gases have similar behaviour. However, even slight changes in physical conditions such as pressure, temperature, or volume cause a deviation. The behaviour of gases is studied using gas laws. A gas's state variables, such as pressure, volume, and tempera
10 min read
Gas LawsGas Laws, When the conditions are normal, all gases have similar behaviour. However, even slight changes in physical conditions such as pressure, temperature, or volume cause a deviation. The behaviour of gases is studied using gas laws. A gas's state variables, such as pressure, volume, and tempera
10 min read
Gas LawsGas Laws, When the conditions are normal, all gases have similar behaviour. However, even slight changes in physical conditions such as pressure, temperature, or volume cause a deviation. The behaviour of gases is studied using gas laws. A gas's state variables, such as pressure, volume, and tempera
10 min read
Gas LawsGas Laws, When the conditions are normal, all gases have similar behaviour. However, even slight changes in physical conditions such as pressure, temperature, or volume cause a deviation. The behaviour of gases is studied using gas laws. A gas's state variables, such as pressure, volume, and tempera
10 min read
Gas LawsGas Laws, When the conditions are normal, all gases have similar behaviour. However, even slight changes in physical conditions such as pressure, temperature, or volume cause a deviation. The behaviour of gases is studied using gas laws. A gas's state variables, such as pressure, volume, and tempera
10 min read
Ideal Gas LawThe ideal gas law also called the general gas equation, is an equation that provides the relation among the various parameters of the gas i.e. they provide the relation among pressure(P), temperature(T), and Volume(V) of the gas. It is a combination of Charles’s law, Boyle’s Law, Avogadro’s law, and
10 min read
Derivation of Ideal Gas EquationThe ideal gas law is a well-defined approximation of the behaviour of several gases under various situations in thermodynamics. The Ideal Gas Equation is a mathematical formula that uses a combination of empirical and physical constants to express the states of hypothetical gases. The general gas eq
9 min read
Kinetic Energy and Molecular SpeedsTo study the action of molecules scientists have thought to study a theoretical model and that model is the Kinetic theory of gases and it assumes that molecules are very small relative to the distance between molecules. Typically, the actual properties of solids and fluids can be depicted by their
6 min read
Kinetic Molecular Theory of GasesThe kinetic molecular theory of gases explains a gas's three macroscopic characteristics in terms of the microscopic nature of the gas's atoms and molecules. The size, shape, mass, and volume of solids and liquids are commonly used to characterize their physical properties. Gases, on the other hand,
9 min read
Deviation of Real Gases from Ideal Gas BehaviourA state of matter is one of the different forms. In everyday life, four states of matter are visible: solid, liquid, gas, and plasma. Many intermediate states, such as liquid crystal, are known to exist, and certain states, such as Bose-Einstein condensates, neutron-degenerate matter, and quark-gluo
9 min read
Liquefaction of GasesPhysics and chemistry are both concerned with the study of matter, energy, and their interactions. Scientists know that matter can change states and that the sum of a system's matter and energy is constant because of thermodynamic rules. Matter changes state when energy is added or removed, forming
8 min read
Chapter 6 Thermodynamics
Basics Concepts of ThermodynamicsThermodynamics is concerned with the ideas of heat and temperature, as well as the exchange of heat and other forms of energy. The branch of science that is known as thermodynamics is related to the study of various kinds of energy and its interconversion. The behaviour of these quantities is govern
12 min read
Enthalpy Change of a ReactionThe study of thermodynamics is the study of systems that are too large to be extrapolated by mechanics alone. For many generations, thermodynamics was vaguely understood, and many of the results were determined only experimentally. Some of the results posed great theoretical challenges for physicist
9 min read
Enthalpies for Different Types of ReactionsThermodynamics is a field of physics that studies the relationship between heat, work, and temperature, as well as their relationships with energy, entropy, and the physical properties of matter and radiation. The four principles of thermodynamics regulate the behaviour of these quantities, which pr
10 min read
What is Spontaneity? - Definition, Types, Gibbs EnergyThermodynamics is a discipline of physics that studies heat, work, and temperature, as well as their relationships with energy, radiation, and matter's physical characteristics. The four principles of thermodynamics regulate the behaviour of these quantities, which provide a quantitative description
7 min read
Gibbs Energy Change and EquilibriumEnergy can take many forms, including kinetic energy produced by an object's movement, potential energy produced by an object's position, heat energy transferred from one object to another due to a temperature difference, radiant energy associated with sunlight, the electrical energy produced in gal
10 min read
Chapter 7 Equilibrium
Equilibrium in Physical ProcessesEquilibrium exists in physical processes, just as it does in chemical reactions. The equilibrium that arises between different states or phases of a substance, such as solid, liquid, and gas, is referred to as this. Let's take a closer look at how equilibrium works in physical processes. Substances
11 min read
Equilibrium in Chemical ProcessesChemical equilibrium is the state of a system in which the reactant and product concentrations do not change over time and the system's attributes do not change further. Reactions take place in both forward and reverse directions. When the rates of the forward and reverse reactions are similar in su
7 min read
Law of Chemical Equilibrium and Equilibrium ConstantDuring a chemical process, chemical equilibrium refers to the state in which the concentrations of both reactants and products have no tendency to fluctuate over time. When the forward and reverse reaction rates are equal, a chemical reaction is said to be in chemical equilibrium. The state is known
8 min read
Applications of Equilibrium ConstantsWhen a chemical process reaches equilibrium, the equilibrium constant (usually represented by the symbol K) provides information on the relationship between the products and reactants. For example, the equilibrium constant of concentration (denoted by Kc) of a chemical reaction at equilibrium can be
6 min read
What is the Relation between Equilibrium Constant, Reaction Quotient and Gibbs Energy?A scientist was observing a reaction and at a certain point and found the concentration of reactant is equal to the concentration of product and after some time and observed color of reactant is changing, the scientist found concentration of products is greater than the concentration of reactants, f
8 min read
Ionic EquilibriumReactants and products coexist in equilibrium, therefore reactant conversion to product is never greater than 100%. Equilibrium reactions may entail the breakdown of a covalent (non-polar) reactant or the ionisation of ionic compounds in polar solvents into their ions. This part will teach us about
5 min read
Acids, Bases and SaltsAcids, Bases, and Salts are the main chemical compounds that exist in our surroundings. Acids, Bases, and Salts are compounds that occur naturally and can also be created artificially. They are found in various substances including our food. Vinegar or acetic acid is used as a food preservative. Cit
15+ min read
Ionization of Acids and BasesIonization of a compound in Chemistry is the process by which neutral molecules are divided into charged ions in a solution. According to the Arrhenius Theory, acids are substances that dissociate in an aqueous medium to produce hydrogen ions, H+ ions, and bases are substances that dissociate in an
6 min read
Importance of pH in Everyday LifeAcids, bases, and salts have an impact on chemistry as well as our daily lives. Acids have a sour flavour (the word acid comes from the Latin word ‘acere’ which means ‘sour’), bases have a bitter taste, while salts themselves have a salty taste. Citric acid is found in fruits such as oranges and lem
13 min read
Strength of AcidsAcids are a molecule or other species which can donate a proton or accept an electron pair in reactions. When acids react with H2O, they create hydrogen ions; the strength of an acid is determined by the concentration of hydrogen ions in a solution. A higher number of hydrogen ions indicates that th
6 min read
Buffer SolutionBuffer Solution is a special aqueous solution that resists the change in its pH when some quantity of acid and Base is added. Many fluids, such as blood, have specific pH values of 7.14, and variations in these values indicate that the body is malfunctioning. The change in pH of Buffer Solutions on
10 min read
Solubility EquilibriaThe word "solubility product" refers to inexpensively soluble salts. It is the greatest product of the molar concentration of the ions (raised to their appropriate powers) produced by compound dissociation. The solubility product is constant at any given temperature. The lower the solubility product
5 min read
Chapter 8 Redox Reactions
Chapter 9 Hydrogen
Dihydrogen - Structure, Properties and ApplicationsThe lightest element is hydrogen. Under normal conditions, hydrogen is a gas composed of diatomic molecules with the formula H2. It is colourless, odourless, non-toxic, and extremely flammable. Hydrogen is the most abundant chemical element in the universe, accounting for roughly 75% of all normal m
7 min read
Isotopes of HydrogenIsotopes of an atom are variants of the same atom but with different mass numbers. That is if two atoms have the same atomic number but different mass numbers then they are called the isotopes of one another. Various examples of the isotopes are the isotopes of hydrogen, we have three different isot
10 min read
HydridesHydride in Chemistry is the name of a compound containing Hydrogen Anion. Hydrides are chemical compounds with one atom of hydrogen and an extra atom. Hence, they are an anion of Hydrogen. An anion is a species that has extra electrons and thus exhibits a negative charge. Thus, hydride (hydrogen ani
6 min read
Structure and Properties of WaterWater is a valuable natural resource. Water is essential for the survival of all living things. We can't imagine a world without water. Water is required by animals and plants to complete their daily metabolic activities. Water is required by plants to synthesize their food through the photosynthesi
9 min read
Chemical Formula of Water - Structure, Properties, Uses, Sample QuestionsHydrogen (H) has unique kind properties that are not like some other component on our planet, close to 66% of our Universe's mass is made out of this unique component. It is both electropositive as well as electronegative, as it structures hydrogen particles (H+)as well as hydride particles (H-). Hy
4 min read
Dihydrogen as Fuel - Definition, Uses, ExamplesHydrogen is the first element on the modern periodic table. It has the simplest atomic structure as compared to all other elements. In atomic form, it has one proton and one electron. On the other hand, in elemental form, it exists as a diatomic (H2) molecule called dihydrogen. If Hydrogen loses its
7 min read
Chapter 10 S-block Elements
Alkali MetalsAlkali metals are the first group of s-block elements that are found on the leftmost side of the periodic table. Alkali metals are the most electropositive elements on the periodic table as they easily lose electrons. These metals formed various useful compounds with halides, oxygen, and sulfur. Alk
11 min read
Characteristics of the Compounds of Alkali MetalsThere are a large number of elements around us having different properties and different uses based on those properties. For using these elements, properties are important so there should be some table to group these elements. This table is known as a periodic table which is created by using the wor
6 min read
Anomalous Behavior of Lithium and BerylliumElements are arranged in a periodic table row-wise and column-wise according to similarities in their chemical and physical properties. The elements in the first column are known as Group 1 elements which have the following elements lithium, sodium, potassium, rubidium, Caesium and Francium. All the
8 min read
Some Important Compounds of SodiumSodium is a soft metal, it is the eleventh element in the periodic table. It is represented by the Na symbol and the atomic number of sodium is 11 it belongs to the family of s-block elements in the periodic table. Sodium is the sixth most abundant element. Its amount in the earth's crust is nearly
7 min read
What is Sodium Chloride? - Definition, Preparation, Properties, UsesSalt's chemical name is sodium chloride. Sodium is an electrolyte that regulates your body's water content. Sodium is also involved in nerve impulses and muscle contractions. Sodium chloride is a medication used to treat or prevent sodium loss caused by dehydration, excessive sweating, or other fact
6 min read
Alkaline Earth MetalsAlkaline Earth Metals are Group 2 elements which includes a collection of elements Beryllium, Magnesium, Calcium, Barium, Strontium, and Radium, which are soft silver metals with a less metallic quality than Group 1 alkali metals. All the heavier metals in Group II such as Ca, Sr, Ba, and Ra, share
11 min read
Characteristics of the Compounds of Alkaline Earth MetalsAll the elements that exist in nature are arranged in a periodic table after several years of research work, these are placed in groups and rows based on some predefined criteria. Some elements may not follow the criteria but still, they are placed in the same column or group due to their similariti
8 min read
Anomalous Behavior of Lithium and BerylliumElements are arranged in a periodic table row-wise and column-wise according to similarities in their chemical and physical properties. The elements in the first column are known as Group 1 elements which have the following elements lithium, sodium, potassium, rubidium, Caesium and Francium. All the
8 min read
Some Important Compounds of CalciumCalcium is a reactive alkaline earth metal that when exposed to the air generates a black oxide-nitride coating. Its physical and chemical properties are most similar to those of strontium and barium, its heavier homologues. After iron and aluminium, it is the fifth most abundant element in the Eart
7 min read
Plaster of ParisPlaster of Paris is a well-known chemical compound that is widely used in sculpting materials and gauze bandages. While we have seen numerous applications of this substance in our daily lives, Plaster of Paris is a white powdered chemical compound that is hydrated calcium sulphate that is typically
8 min read
Biological Importance of Alkali and Alkaline Earth MetalsElements are arranged in a periodic table row-wise and column-wise according to similarities in their chemical and physical properties. The elements in the first column are known as Group 1 elements which have the following elements lithium, sodium, potassium, rubidium, Caesium and Francium. All the
10 min read