Enzymes - Definition, Structure, Classification, Examples
Last Updated : 26 Apr, 2024
Enzymes are biological molecules that act as catalysts, speeding up chemical responses in living organisms. They work by lowering the activation energy needed for a response to do, therefore adding the rate of the response without being consumed themselves. Enzymes play pivotal places in colorful natural processes, similar as metabolism, digestion, and cell signaling.
Enzymes
Enzymes are nitrogenous organic molecules produced by living organisms such as plants and animals. A long chain of one or more amino acids is connected together using amide or peptide bonds to make them.
They are high-molecular-mass proteins that catalyse natural processes in the bodies of animals and plants. They are also known as polypeptides. Enzymes are categorised into distinct categories based on their structure and properties. Enzymes have a specific method of action (Lock-and-Key mechanism and Enzyme Fit Hypothesis).
Structure of Enzyme
- Enzymes are proteins that are made up of several polypeptide chains, also known as amino acids, that have been folded and coiled numerous times.
- They have linear chains of amino acids in three-dimensional structures.
- The enzyme's catalytic activity is determined by the amino acid sequence. Only a small portion of an enzyme's structure participates in catalysis and is located around the binding sites.
- They have separate sites; the active site of an enzyme is made up of the catalytic and binding sites.
Classification of Enzymes
The International Union of Biochemists divides enzymes into six types based on the sort of reaction they catalyse (I U B). Oxidoreductases, transferases, hydrolases, lyases, ligases, and isomerases are the six types of enzymes. The following are their functions:
- Oxidoreductases: Oxidoreductase is an enzyme that catalyses the oxidation and reduction reactions in which electrons are transferred from one form of a molecule (electron donor) to the other (electron acceptor). Consider the enzyme pyruvate dehydrogenase. Cofactors for oxidoreductase enzymes are commonly NADP+ or NAD+.
AH2+B→A+BH2
- Transferases: These catalyse the transfer of a chemical group (functional group) from one compound (referred to as the donor) to another compound (referred to as the recipient) (called the acceptor). A transaminase, for example, is an enzyme that transfers an amino group from one molecule to another.
A–X+B↔B–X+A
- Hydrolases: They are hydrolytic enzymes that catalyse the hydrolysis reaction by cleaving the bond and hydrolyzing it with water molecules, i.e. they catalyse the hydrolysis of a bond. Pepsin, for example, breaks down peptide connections in proteins.
A–X+H2O→X–OH+A–H
- Lyases: They are enzymes that catalyse bodywork by creating a double bond or adding a group to a double bond without involving hydrolysis or oxidation. Aldolase (a glycolysis enzyme) catalyses the conversion of fructose-1, 6-bisphosphate to glyceraldehyde-3-phosphate and dihydroxyacetone phosphate, for example.
A–X+B–Y→A=B+X–Y
- Isomerases: They're an enzyme family that converts a chemical from one isomer to another. Isomerases aid intramolecular rearrangements by breaking as well as forming bonds. In glycogenolysis, for example, phosphoglucomutase catalyses the conversion of glucose-1-phosphate to glucose-6-phosphate (the phosphate group is moved from one position to another in the same substance). For energy to be released fast, glycogen is converted to glucose.
ACis→A′Trans
- Ligases: Ligase is a catalytic enzyme that catalyses the ligation or connecting of two big molecules by establishing a new chemical link between them. DNA ligase, for example, catalyses the formation of a phosphodiester bond between two DNA fragments.
A+B→AB
Enzyme Cofactor
Cofactors are chemical substances that are not proteins and are found in enzymes. A cofactor affects the action of an enzyme by acting as a catalyst. Apoenzymes are enzymes that do not require a cofactor. The holoenzyme is made up of an enzyme and its cofactor.
Three Kinds of Cofactors Present in Enzymes:
- Prosthetic groups: These are cofactors that are always covalently or permanently linked to an enzyme. Many enzymes have a FAD (Flavin Adenine Dinucleotide) prosthetic group.
- Coenzyme: A coenzyme is a non-protein organic molecule that only interacts to an enzyme during catalysis. It is separated from the enzyme at all other times. NAD+ is a widely used coenzyme.
- Metal ions: Certain enzymes require a metal ion in the active site to establish coordinate bonds during catalysis. A number of enzymes use the metal ion cofactor Zn2+.
Check: Nature of Enzyme Action
Mechanism of Enzyme Action
The active site of an enzyme draws substrates and catalyses the chemical process that produces products. Allows the products to disassociate or detach from the enzyme's surface after product production. The enzyme-substrate complex is the combination of an enzyme and its substrates.
The reaction requires the collision of any two molecules, as well as the correct orientation and a sufficient quantity of energy. This energy must be transferred between these molecules in order to overcome the reaction's Activation Energy barrier. Without any catalysts, the substrate and enzyme produce an intermediate reaction with low activation energy.
Two of the most well-known mechanisms of enzyme function are the Induced Fit Hypothesis and the Lock and Key Mechanism.
- Induced Fit Hypothesis: In 1958, Daniel Koshland proposed the induced fit model. One of the most common models for characterising the enzyme-substrate interaction is this one. The active site of the enzyme, according to the idea, does not have a firm shape. As a result, the substrate does not completely fit into the enzyme's active site. As a result, when the enzyme binds to the substrate, the active site changes form, becoming complementary to the substrate's shape. Because of the flexibility of the protein, this conformational shift is possible.
- Lock and Key Mechanism: Emil Fischer proposed the lock and key concept in 1894, and it is now known as Fisher's theory, which describes the enzyme-substrate interaction. Emil Fischer proposed the lock and key model in 1894. As a result, it's sometimes referred to as Fisher's theory. The enzyme-substrate interaction is described by the second model.
- The enzyme's active site functions as the 'lock,' while its substrate serves as the 'key,' according to the lock and key concept. As a result, the form of the enzyme's active site complements the shape of the substrate. By generating an useless intermediate product, the enzyme-substrate complex, the active site of the enzyme can hold the substrate closer to the enzyme.
Check: Mechanism of Enzymes Action
Enzymes as Biochemical Catalysts
Biochemical catalysts are also known as enzymes, and the phenomenon is known as biochemical catalysis. Enzymes are widely used to enhance or expedite the efficient preparation and effect of beverages, chocolates, curd, predigested infant food, washing powders, and other products.
Examples of Enzyme Catalysis
- Cane sugar inversion: Cane sugar is converted to glucose and fructose by the enzyme invertase.
C12H22O11(aq)+H2O(1) → C6H12O6(aq) + C6H12O6(aq)
- Conversion of milk to curd: The enzyme lactase, which is released by lactobacilli, is responsible for turning milk into curd.
- Conversion of glucose into ethyl alcohol: Glucose is converted to ethyl alcohol and carbon dioxide by the zymase enzyme.
C6H12O6(aq) → 2C2H5OH(aq) + 2CO2(aq)
- Conversion of starch into maltose: Starch is converted to maltose by the diastase enzyme.
Factors Affecting Enzyme Catalysis
- Concentration of Substrate: In the presence of an enzyme, the rate of a chemical reaction increases as the substrate concentration rises until a limiting rate is achieved, after which additional increases in the substrate concentration have no effect on the reaction. The enzyme molecules are saturated with the substrate at this point. The extra substrate molecules are unable to react until the substrate that has already been bound to the enzymes has reacted and been released.
- Concentration of Enzyme: When the enzyme concentration is much lower than the substrate concentration, the rate of an enzyme-catalyzed reaction is proportional to the enzyme concentration. This is true for any catalyst; when the catalyst concentration rises, the reaction rate rises as well.
- Temperature: For most chemical reactions, a temperature increase of 10°C about doubles the reaction rate, according to a well-known rule of thumb. This rule applies to all enzymatic reactions to some extent. Even a slight increase in temperature, after a certain threshold, induces denaturation of the protein structure and disruption of the active site, resulting in a drop in reaction rate.
- Hydrogen Ion Concentration (pH): Most enzymes are proteins, and they are sensitive to variations in pH or hydrogen ion concentration. The degree of ionisation of an enzyme's acidic and basic side groups, as well as the substrate components, is affected by changes in pH. The catalytic activity of an enzyme is altered when one of these charges is neutralised. Over a narrow pH range, an enzyme's activity is at its peak. The enzyme's optimal pH is determined by the median value of this pH range.
- Inhibition of Enzymes: Enzymes must occasionally be slowed to aid and ensure that our bodies' systems operate appropriately and efficiently. For example, if an enzyme produces too much of a product, it must be possible to reduce or stop production. Inhibitors are required in such situations.
Enzymes Inhibition: A molecule blocks the active site, causing the substrate to compete with the inhibitor for binding to the enzyme. Non-competitive inhibitors bind to an enzyme in a location other than the active site, reducing its effectiveness. Inhibitors that bind to the enzyme-substrate complex are known as noncompetitive inhibitors. The products exit the active site with less ease, slowing the reaction. Irreversible inhibitors bind to an enzyme and render it inactive for the rest of its life.
Drug Action of Enzymes
Drugs that act on the active sites of enzymes can control, i.e. inhibit or stimulate, enzyme function. The majority of medications that act on enzymes are inhibitors, and the majority of them are competitive inhibitors, meaning they compete with the enzyme's substrate for binding. The bulk of the original (first generation) kinase inhibitors, for example, bind to the enzyme's ATP pocket.
Examples of Enzymes
- Lipases are a group of enzymes that aid in the digestion of lipids in the intestine.
- Amylase is a protein that aids in the conversion of carbohydrates to sugars. Saliva contains this enzyme.
- Maltase is a sugar that breaks down maltose into glucose and is found in saliva. Maltose can be found in a variety of foods, including potatoes, pasta, and beer.
- Trypsin is an enzyme that breaks down proteins into amino acids and is located in the small intestine.
- Lactase is an enzyme present in the small intestine that aids in the breakdown of lactose, a sugar found in milk, into glucose and galactose.
- Helicase is a DNA unravelling enzyme.
- DNA Polymerase is a type of enzyme that makes DNA from deoxyribonucleotides.
Check: Classification of Drugs
Chemical Nature of Enzyme
- Enzymes are primarily composed of proteins.
- Proteins are made up of chains of amino acids.
- Amino acids are folded into specific three-dimensional shapes, determining the enzyme's structure.
- The structure includes an active site where the substrate binds and catalytic reactions occur.
- Enzymes can also be RNA molecules, although less common than protein enzymes.
- The sequence and structure of amino acids in enzymes dictate their function and specificity for particular substrates.
Similar Reads
CBSE Class 12 Chemistry Notes CBSE Class 12 Chemistry Notes: Chemistry is an important subject in CBSE Class 12th. It is a very scoring exam in board exam as well as IIT JEE entrance. By taking help of this CBSE Class 12th Chemistry notes, you can ace the CBSE Class 12th board exam. GeeksforGeeks has compiled the complete notes
9 min read
Chapter 1: The Solid State
Difference between Crystalline and Amorphous SolidsA solid state is simply one of the states of matter. One of the many different states of matter is solid. Solids have a distinct volume, mass, and shape. Solids differ from liquids and gases in that they exhibit unique characteristics. Â These solid states or shapes depending on how the particles are
7 min read
Crystal Lattice and Unit CellIn crystalline solids, their constituent particles have a definite arrangement in three dimensions. The positions of these particles in the crystal relative to each other are usually represented by points. The dispensation of these unendurable sets of points is called a space lattice. The positions
7 min read
Calculate the Number of Particles per unit cell of a Cubic Crystal SystemWe are mostly surrounded by solids, which we use more frequently than liquids and gases. We require solids with a wide range of properties for various applications. These properties are determined by the nature of the constituent particles and the binding forces that exist between them. As a result,
5 min read
Close Packing in CrystalsIn the formation of crystals, the constituent particles (atoms, ions, or molecules) are closely intertwined. A tightly packed arrangement is one in which maximum available space is occupied by leaving minimum free space. This corresponds to the condition of the maximum possible density. The closer t
7 min read
Packing Efficiency of Unit CellA crystal lattice is made up of a relatively large number of unit cells, each of which contains one constituent particle at each lattice point. A three-dimensional structure with one or more atoms can be thought of as the unit cell. Regardless of the packing method, there are always some empty space
10 min read
Imperfections or Defects in a SolidMatter can exist in broadly three states named solids, liquids, and gases. Solids are those substances that have short intermolecular forces between them that keep molecules (atoms or ions) closely packed. They have definite mass, volume, and shape. Their intermolecular forces are strong and intermo
11 min read
Chapter 2: Solutions
What is a Solution?InSolutions are a part of our daily lives because they can be found in almost everything we use in our daily lives, such as soda, deodorant, sugar, salt, and so on. A solution is a type of mixture in which two or more substances combine to form a single solution; it can also be described as simple,
11 min read
SolubilitySolubility is a fundamental concept in chemistry that describes the ability of a substance to dissolve in a particular solvent under specific conditions to form a solution. A fluid may or may not dissolve completely in a fluid. Understanding the concept of solubility is essential in many fields of s
12 min read
Vapour PressureVapour pressure is the force exerted by a liquid's (or solid's) vapour above the surface of the liquid. At a particular temperature and thermodynamic equilibrium, this pressure is formed in a closed container. The rate of liquid evaporation is controlled by the equilibrium vapour pressure. The vapou
13 min read
Colligative PropertiesColligative Properties of any solution is the property of the solution that depends on the ratio of the total number of solute particles and the total number of solvent particles. Changing the moles or number of particles of solute or solvent changes the colligative properties of the solution. These
11 min read
Osmosis and Osmotic PressureA solution is a homogeneous mixture of two or more particles with particle sizes smaller than one nanometer. Sugar and salt solutions in water, as well as soda water, are common examples of solutions. In a solution, all of the components appear as a single phase. There is particle homogeneity, which
11 min read
Abnormal Molar MassesIn chemistry, abnormal molar masses occur when the molar masses are estimated and are higher or lower than the predicted value. The colligative qualities are used to calculate these. Elevation of boiling point, decreased relative vapour pressure, freezing point depression, and alleviation of osmotic
8 min read
Chapter 3: Electrochemistry
Chapter 4: Chemical Kinetics
Chapter 5: Surface Chemistry
Adsorption - Definition, Mechanism and TypesAdsorption is the adhesion of atoms, ions, or molecules to a surface from a gas, liquid, or dissolved solids. This process forms an adsorbate film on the adsorbent's surface. This differs from absorption, which occurs when a fluid dissolves or permeates a liquid or solid. Adsorption is a surface phe
7 min read
Adsorption vs AbsorptionAdsorption and Absorption are the two important processes of physical chemistry that help in various industrial processes to manufacture and purification of various chemical compounds. While the two terms sound almost similar there exists a significant difference between them. Adsorption is a surfac
10 min read
Catalysis - Definition, Mechanism, Types, CharacteristicsCatalysis in Chemistry is defined as the process in which the rate of the reaction is influenced by the presence of some specific substance. These specific substances are called Catalysts. The catalyst is never consumed during the chemical reaction. A catalyst changes the activation energy of the re
8 min read
ColloidsColloids or Colloidal Solution is a type of mixture in which insoluble components are suspended on a microscopic scale in some another component. Colloids are essential components in the daily lives of the common man, as we use or consume colloids and we even don't know. From Jellys to Mayonese to t
11 min read
Classification of ColloidsBefore we get into the specifics of how we classify colloids, it's important to first define what a colloid is. A colloid is a material made up of big molecules mixed with another substance in chemistry. This encompasses a wide range of items, many of which you may already have in your house, which
8 min read
Emulsions - Definition, Types, Preparation, PropertiesDid you know that "emulsion" comes from the Latin word "mulgeo," which meaning "to milk"? Milk is a fat-water emulsion containing a variety of additional ingredients. But what precisely are Emulsions, and what role do they play in our daily lives and in the workplace? Emulsions are combinations of t
10 min read
Chapter 6: General Principles and Processes of Isolation of Elements
Occurrence of Metals, Minerals and OresMetals are a crucial element of our existence, even if we don't realize it. Since the industrial era, we have had a heavy reliance on metals. From construction to jewellery, we use them for everything. But where do we acquire these metals from? Let us look into their occurrence. Before studying the
8 min read
What is meant by Concentration of Ores?Metals are found in ore in complexes with other elements. The process of removing metal from its ore is known as metal extraction. The methods of extracting metals from their ores and refining them are referred to as metallurgy. All of the metals cannot be extracted using a single process. Depending
8 min read
Occurrence and Extraction of MetalsMetals are minerals or substances that occur naturally beneath the Earth's surface. The majority of metals are lustrous or glossy. Metals are inorganic, which implies they were formed from non-living substances. Metals are typically found in the form of metal ores, which are linked to one another an
6 min read
Ellingham DiagramThe Gibbs equation enables us to predict the spontaneity of a process based on enthalpy and entropy measurements. The Ellingham diagram was developed by H.G.T. Ellingham to predict the spontaneity of metal oxide reduction. One of the most straightforward graphical representations of Thermodynamic st
7 min read
Oxidation and Reduction ReactionsOxidation and Reduction reactions are simply called Redox reactions. There are chemical reactions in which the oxidation number of the chemical species involved in the reaction changes. Oxidation and reduction Reactions involve a wide variety of processes. For example, oxidation-reduction reactions
8 min read
Methods of Refining of MetalsMinerals and ores abound in the earth's crust. Some ores have proven to be a valuable resource for humanity. Iron, for example, derived from iron ore (Hematite), laid the groundwork for the industrial revolution. Aluminium, on the other hand, was a critical strategic resource for aviation during Wor
7 min read
Uses of Aluminum, Copper, Zinc and IronThe earth's crust is abundant in minerals and ores. Some ores have proven to be a valuable resource for humanity. Iron, for example, derived from iron ore (Hematite), laid the groundwork for the industrial revolution. Aluminum, on the other hand, was a critical strategic resource for aviation during
8 min read
Chapter 7: The p-Block Elements
Group 15 elements - The Nitrogen FamilyThe contemporary periodic table, devised by Dimitri Mendeleev, lists all known elements according to their atomic number, which is unique to each element. The periodic table was created as a result of such an arrangement. The items with comparable qualities were grouped together in a column. Nitroge
6 min read
Dinitrogen - Definition, Preparation, Properties, UsesNitrogen is the lightest element in Periodic Table Group 15, also known as the pnictogens. Dinitrogen, a colourless and odourless diatomic gas with the formula N2, is formed when two atoms of the element join together at STP. Dinitrogen is the most abundant uncombined element, accounting for around
6 min read
Ammonia |Structure, Properties, Preparation, UsesAmmonia (NH₃) is a colorless gas with a sharp, pungent odor. It is a compound of nitrogen and hydrogen and plays a crucial role in both the industrial sector and biological processes. Let's learn about ammonia in detail, including its structure, properties and uses. AmmoniaAmmonia is nitrogen and hy
7 min read
Oxides of NitrogenNitrogen combines with oxygen to generate nitrogen oxides in a variety of forms. Its oxides have distinct oxidation states, ranging from +1 to +5. Nitrogen oxides with a greater oxidation state are more acidic than those with a lower oxidation state. Nitrogen Oxides are a combination of gases that i
9 min read
Allotropes of PhosphorusDespite the fact that people have been using the periodic table with phosphorus (P) in it for thousands of years, it was not until 1669 that it was isolated and named by a chemist named Brand. Phosphorus is an element that cannot be found naturally in our environment. It is highly reactive. Phosphor
5 min read
Phosphine - Structure, Preparation, Properties, UsesThe final electron of a P block element enters one of the three p-orbitals of the shell in which it is found. There are six groups of p-block elements since a p-subshell has three degenerate p-orbitals, each of which may hold two electrons. Because of their tendency to lose an electron, P block elem
5 min read
Phosphorus Halides - Structure, Properties, Uses, EffectsPhosphorus is required for life, mostly through phosphates, which are molecules that contain the phosphate ion. Phosphates are found in DNA, RNA, ATP, and phospholipids, which are all complex molecules that are required by cells. Phosphate was first found in human urine, and bone ash was a significa
8 min read
Oxoacids of PhosphorusOxoacids are acids that contain oxygen. Phosphorus is one such element that can be used to create a variety of oxoacids. H3PO4, H3PO3, and other common oxyacids The phosphorus atom is tetrahedrally surrounded by other atoms in phosphorus oxoacids. In general, it is obvious that these acids have at l
6 min read
ChalcogensChalcogens are the Group 16 elements of the modern periodic table consisting of 5 elements oxygen, sulphur, selenium, tellurium and polonium. The elements in this group are also known as chalcogens or ore-forming elements because many elements can be extracted from sulphide or oxide ores. The chalco
9 min read
Dioxygen - Definition, Properties, Preparation, UsesOxygen is a member of the periodic table's chalcogen group, a highly reactive nonmetal, and an oxidizing agent that readily forms oxides with most elements and other compounds. Oxygen is the most abundant element on Earth, and it is the third-most abundant element in the universe after hydrogen and
5 min read
Simple Oxides - Definition, Types, ExamplesOxides are binary chemicals generated when oxygen reacts with other elements. In nature, oxygen is extremely reactive. They create oxides when they react with metals and nonmetals. Based on their acid-base properties, oxides are classified as neutral, amphoteric, basic, or acidic. An acidic oxide is
5 min read
Ozone - Preparation, Properties, Uses, EffectsOzone is too reactive to stay in the atmosphere at sea level for long. It is formed from atmospheric oxygen in the presence of sunlight at a height of about 20 kilometres. This ozone layer shields the earth's surface from an excess of ultraviolet (UV) radiation. It is an unstable, blue, diamagnetic
7 min read
Allotropes of SulphurThe tenth most prevalent element in the universe is sulphur. It can also be found in the form of sulphide in a variety of meteorites. The existence of a sulphur element in molten, gaseous, and solid states gives the Jupiter moon lo its unusual colours. Sulphur is the sixth most prevalent element on
7 min read
Sulphur Dioxide - Structure, Preparation, Properties, UsesThe p-block, which spans groups 13 to 18, is located on the right side of the normal periodic table. Their electrical configuration is ns2 np1–6 in general. Despite being the first element in group 18, helium is not part of the p-block. Except for the first row, each row in the table has six p-eleme
8 min read
Oxoacids of SulphurOxoacids are oxygen-containing acids. Many oxoacids, such as H2SO4, H2SO3, and others, are known to be formed by sulphur. When sulphur is coordinated to oxygen, it forms a tetrahedral structure in oxoacids. Sulfur oxoacids are sulphur, oxygen, and hydrogen-containing chemical compounds. Sulfuric aci
6 min read
Sulfuric Acid - H2SO4Sulfuric Acid or Sulphuric Acid is a mineral acid consisting of one Sulfur, four Oxygen, and two Hydrogen atoms. The chemical or molecular formula of Sulfuric Acid is H2SO4. Sulfuric Acid is one most important commercially used chemicals. It is also known as Mattling acid or Hydrogen Sulfate or Vitr
8 min read
Group 17 Elements: The HalogensThe Halogens are the elements in the periodic table of Group 17 of the periodic table. Fluorine, chlorine, bromine, and iodine are examples of reactive nonmetals. Halogens are nonmetals that are extremely reactive. These elements have a lot in common in terms of properties. Group 17 elements are kno
8 min read
Chlorine (Cl)Chlorine is a chemical element that is represented by the symbol Cl. Chlorine is present in the 17th Group (Halogen Group) and 3rd Period of the Periodic table. Chlorine is the second lightest halogen that lies between Fluorine and Bromine in the halogen group. Chlorine is a yellow-green, pungent-sm
6 min read
Hydrogen Chloride - Definition, Preparation, Properties, UsesAs a hydrogen halide, the compound hydrogen chloride has the chemical formula HCl. It is a colourless gas at ambient temperature that emits white fumes of hydrochloric acid when it comes into contact with air-water vapour. In technology and industry, hydrogen chloride gas and hydrochloric acid are c
7 min read
Oxoacids of Halogens - Definition, Properties, StructureThe elements of Group 17 from top to bottom are fluorine, chlorine, bromine, iodine, and astatine. They are referred to as halogens because they create salt. This group's members are very similar to one another. They have a consistent pattern of physical and chemical features. The valence shell of e
7 min read
Interhalogen CompoundsThe p-block elements are known to be those elements in which the electron enters in one of the three orbitals of the p-block. There are 6 groups of p-block elements. The properties of p-block elements are that they are shiny and are good conductor of heat and electricity since they have free electro
6 min read
Group 18 Elements - Characteristics of Noble GasesThe group's members have eight electrons in their outermost orbit (except helium which has two electrons). As a result, they have a stable configuration. Group 18 elements are gases that are chemically unreactive, meaning they do not form many compounds. Be a result, the elements are referred to as
7 min read
Chapter 8: d- and f-Block Elements
Position of Elements in the Periodic TableThe elements in the middle of the periodic table, from Group 3 to 12, are referred to as d-block elements. The name d-block comes from the fact that the final electron enters the d-orbital of the penultimate shell. These are frequently referred to as transition elements because their properties fall
6 min read
Electronic Configuration of the d-block ElementsElectronic Configuration of the d-block elements are those that can be found in the contemporary periodic table from the third to the twelfth groups. These elements' valence electrons are located in the d orbital. d-block elements are sometimes known as transition elements or transition metals. The
7 min read
General Properties of Transition Elements (d-block)Elements with partially filled d orbitals are known as transition elements (sometimes known as transition metals). Transition elements are defined by IUPAC as elements with a partially full d subshell or elements capable of forming stable cations with an incompletely filled d orbital. In general, an
7 min read
Lanthanides - Definition, Configuration, PropertiesLanthanides are the contemporary periodic table's rare earth elements, with atomic numbers ranging from 58 to 71 after Lanthanum. Rare earth metals are so-called because these elements are extremely rare (3 × 10-4 % of the Earth's crust). As lanthanide orthophosphates, they are accessible in 'monazi
8 min read
Actinides - Definition, Properties, Formation, UsesThe d and f block mainly contains elements that include groups 3-12. The f block has elements in which 4f and 5f are progressively filled. These elements are placed below the periodic table in a separate table. The d and f block elements are majorly known as transition or inner transition elements.
9 min read
Some Applications of d and f-block ElementsTransition metals are typically characterized as elements with or capable of forming partially filled 'd' orbitals. Transition elements are d-block elements in groupings of three to eleven. Inner transition metals, which include the lanthanides and actinides, are another name for the f block element
6 min read
Chapter 9: Coordination Compounds