Colloids or Colloidal Solution is a type of mixture in which insoluble components are suspended on a microscopic scale in some another component. Colloids are essential components in the daily lives of the common man, as we use or consume colloids and we even don't know. From Jellys to Mayonese to the majority of beauty products, are some forms of colloids. Thus, understanding colloids will help us understand these things we use on a daily basis but don't know about. In this article, we will learn about colloids in detail including their classification, properties, preparation method, and applications.
Colloids Definition
A solution in which the size of solute particles is intermediate between those in true solution and suspension is called Colloids. Simply, colloids are the mixtures where one substance is split into minute particles which are dispersed throughout a second substance. e.g. Soap solution, milk, blood, etc are some of the examples of colloids.
Colloids (also colloidal solutions or colloidal systems) are mixes of microscopically distributed insoluble particles of one material floating in another. A colloid's suspended particles can range in size from 1 to 1000 nanometres (or 10-9 meters). Generally, in colloids, the component which is in the minority is the dispersed phase and the majority component is called the dispersion medium. For example, in milk fat is a dispersed phase that is distributed in a dispersion medium i.e., water.
The suspended particles in a combination must not settle for them to be classed as a colloid (in the manner that the particles of suspensions settle at the bottom of the container if left undisturbed). Colloidal solutions are known to show the Tyndall Effect, a phenomenon in which light beams impacting on colloids are dispersed as a result of interactions between the light and the Colloidal component.
Classification of Colloids
Colloids can be classified into different classes based on the different properties taken into consideration the different parameters such as the physical states of mediums and phases, the interaction of particles, or different properties of medium and phase particles.
Classification of Colloids Based on Physical States
Based on the physical states of the dispersion medium and dispersed phase, colloids can be classified into many types, some of those classifications are Sols, Emulsion, Foam, Gels, and Aerosols. The details of these types are as follows:
- Sol is a colloidal suspension when the dispersion medium is solid and the dispersion phase is liquid. Paints, inks, gold sol, silver sol, muddy water, starch, etc. are all examples of Sol.
- In Emulsion colloidal suspension, both Dispersion Medium as well as Dispersed Phase, are liquids, and particles of the medium are not soluble in the dispersed phase. For example, we know, that oil and water are insoluble in each other so the oil in water or water in oil are both examples of colloids when mixed together using some methods. Milk and butter are the most common examples of emulsion.
- Aerosols are the solution in which very minute fine particles of solid particles are dispersed into a gas. For example, Smoke, dust storms, exhaust from industries and automobiles, etc.
- Gels are colloidal solutions in which minute liquid droplets are dispersed into a solid dispersion medium, it is also called solid emulsion. For example, Jellies, Cheese, Curd, shoe polish, etc.
- Foam is a colloidal solution in which a liquid dispersion medium is suspended in a gaseous dispersed phase. For example, Pumice stone, rubber, cake, etc.
Other than the above-mentioned types classification, a complete table for each different combination of dispersion medium and the dispersed phase with examples, are given below:
| Dispersion Medium | Dispersed Phase | Type of Colloid | Examples |
|---|
Solid | Solid | Solid sols | Colored Glass, Gemstones,
Rock Salt, some alloys. |
Solid | Liquid | Gels | Jellies, Cheese, curd,
shoe-polish. |
Solid | Gas | Solid foam | Pumice stone, rubber, cake. |
Liquid | Solid | Sol | Paints, inks, gold sol, silver sol,
muddy water, starch. |
Liquid | Liquid | Emulsion | Milk, butter, cod liver oil |
Liquid | Gas | Foam | Soap lather, soda (CO2 is dissolved
in water) water, whipped cream |
Gas | Solid | Aerosol | Smoke, dust storms, and exhaust from
industries and automobiles. |
Gas | Liquid | Aerosol | Fog and Mist |
Classification of Colloids based on Interaction
Based on the interaction between particles of colloids, these can be classified as follows:
- Lyophilic colloids are colloidal solutions where the particles of the dispersed phase have a strong affinity for the particles of the dispersion medium. Examples include gum, starch, gelatin, and proteins.
- Lyophobic colloids are colloidal solutions where the particles of the dispersed phase have a weak affinity for the particles of the dispersion medium. Examples include silver sol, ferric hydroxide sol, and arsenic sulfide sol.
Classification of Colloids based on Properties of Sol Particles
Based on the properties of sol particles, colloids can be classified as follows:
- Multimolecular colloids are colloids formed when small molecules or atoms combine to form a species that falls within the colloidal size range. For example, a sulfur solution consisting of thousands of S8 particles.
- Macromolecular colloids are biomolecules such as enzymes or proteins that are larger in size and form colloids when properly dispersed. Examples include rubber, cellulose, and starch.
- Associated colloids are substances whose molecules are amphiphilic, meaning that they contain both a non-polar hydrophobic part and a polar hydrophilic part.
Classification Based on Dispersion Medium
Based on the specific dispersion medium, the following colloids are defined:
- Hydrosols are colloids in which water is the dispersion medium. Examples include starch colloids.
- Alcosols are colloids in which alcohol is the dispersion medium. Solutions containing ethanol and methanol are examples of alcosols.
- Acrosols are colloids in which air is the dispersed phase. Examples include mist colloids.
Preparation of Colloids
The stable colloids are known as lyophilic sols, in these, the strong forces of attraction take place between the dispersed phase and dispersion medium. Some of the major methods to prepare colloids are as follows:
Condensation Method
Small solute particles are condensed in this process to create a dispersed phase particle.
- Oxidation: We can obtain colloidal Sulphur by passing oxygen gas through the solution of Hydrogen Sulphides. HNO3, H3Br2, etc are used as oxidizing agents in this process.
2H2S + O2 ⇢ 2H2O + 2S
- Reduction: In the process, suitable reducing agents such as formaldehyde, hydrogen peroxide, stannous chloride, etc are reacted with the aqueous solution of these salts to obtain metals like gold, silver, and platinum in the colloidal state.
2AuCl3 + 3SnCl2 ⇢ 3SnCl4 + 2Au
- Double Decomposition: In this process, hydrogen Sulphide is passed through a cold arsenic oxide solution in water and a solution of arsenic Sulphide is obtained.
As2O3 + 3H2S ⇢ As2S3 + 3H2O
- Hydrolysis: Salt solutions are hydrolyzed by boiling their respective dilute solutions. For example, ferric hydroxide is obtained by hydrolysis of its corresponding salt.
FeCl3 + 3H2O ⇢ Fe(OH)3 + 3HCl
Dispersion Methods
Large particles of material (suspension) are broken down into smaller particles using these procedures. The procedures listed below are used:
- Mechanical Dispersion: In this method, the substances are grounded to coarse particles and mixed with a dispersion medium to get a suspension. Then, it is ground in a colloidal mill consisting of two metallic dyes rotating in opposite directions. This method is used to obtain colloidal solutions of black ink paint varnished dyes, etc.
- Electrical or Bredig'S Arc method: In this method, the metal to be changed into solution is made as two-electrode which is immersed in a dispersion medium. An electric arc is used between the electrodes and ice to keep the dispersion medium cool. Here, the excessive amount of heat gives a colloidal solute substance.
- Peptization: The process of changing a freshly prepared precipitate into a colloidal solution is called peptization. A small amount of electrolyte is added as a peptization agent. Some of the important peptizing agents are electrolyte and sugar gem gelatin. For example, a freshly prepared ferric hydroxide can be changed into a colloidal solution through this method by shaking it with water containing FeCl3.
Fe(OH)3 + FeCl3 → (Fe(OH)1 Fe)+3 + 3Cl–
Properties of Colloids
There are many physical and chemical properties colloids have, some of those properties are as follows:
- As the size of particles is very small (1-1000 nanometers), they can't be filtered using the basic filtration method. To filter colloids, we need more specialized filtration methods, such as ultrafiltration or centrifuge.
- Colloids are very stable. and when left untouched for long periods it doesn't show the sign of sedimentation or precipitation.
- Colloids are heterogeneous mixtures, where the dispersed medium is suspended in the dispersion phase in nor uniform arrangement.
- Despite the heterogeneous nature of colloids, they seem to have a homogenous appearance. This is because the particle is very small in colloids which can't be seen by the naked eye.
Tyndall Effect: The Optical Properties of Colloidal Solutions
Colloids show a phenomenon known as the Tyndall effect, which John Tyndall identified in 1869. When we shine a bright converging beam of light through a dark colloidal solution, the path of the beam is lit and we can see the path. This is due to the scattering of light by the Colloidal particles, and this is referred to as the Tyndall effect, and the lighted route is called the Tyndall cone.
Brownian Motion: The Mechanical Properties of Colloidal Particles
The Brownian Motion is a characteristic of scattered particles in a colloidal solution, when a colloidal solution is examined via an ultramicroscope, the colloidal particles may be seen moving in a zigzag pattern.
These colloidal particles are constantly bombarded from all directions by the moving molecules of the dispersion medium. Thus, this gives momentum to the particles, causing them to travel ahead and collide with another particle. Collisions cause the colloidal particle to travel in a random zigzag pattern, and this zigzag pattern motion is called Brownian Motion.
Application of Colloids
Colloids have many applications in various industries, medicine, and domestic settings, including:
- In food: Colloidal systems are found in various food items like syrup, halwa, and soup.
- In medicine: Colloidal silver (Argyrols) is used as an antiseptic for eye infections.
- In air purification: Cottrell precipitator air purification technique uses coagulation of solution particles to remove dust or smoke particles from the air.
- In leather refinishing: Tanning of leather is done by immersing animal skins in a tannin solution with the opposite charge of the animal skin. This process causes particles to agglomerate and the skin to harden.
Also, read
Sample Questions on Colloids
Question 1: Why is Milk a colloid?
Answer:
Due to the charged gap particles that remain suspended in the liquid, milk is a colloid. Milk is a colloid, despite having the appearance of being a homogeneous mixture, since it contains tiny globules of protein and fat that do not separate apart after standing due to the (often negatively) charged particles.
Question 2: What are the changes that may occur in a substance or matter?
Answer:
The changes that occur in the matter are physical and chemical changes. The physical changes are about changes in the state of matter and other external factors whereas, chemical changes are concerned with the chemical composition of the matter.
Question 3: What precautions should be taken during the dialysis process?
Answer:
During the process of dialysis, the distilled water in the container should be frequently changed to prevent the accumulation of crystalloids. Otherwise, the impurities will get diffused back.
Question 4: What is the application of colloids in industrial products?
Answer:
The application of colloid in industrial products are as follows:
- Colloids are used as a thickening agent for the products like lubricants, lotions, toothpaste, etc.
- It is also used in manufacturing inks and paints.
- It is used in medicines as an antiseptic.
- And, as stabilizers in food industries to manufacture foods items like jam, ice cream, etc.
Question 5: Which substance is used to reduce the pore size of filter paper for ultrafiltration?
Answer:
As filter paper have a large pore size which is not efficient for the filtration of colloid so, to reduce the size of pores collodion solution (cellulose nitrate solution) is used.
Similar Reads
CBSE Class 12 Chemistry Notes CBSE Class 12 Chemistry Notes: Chemistry is an important subject in CBSE Class 12th. It is a very scoring exam in board exam as well as IIT JEE entrance. By taking help of this CBSE Class 12th Chemistry notes, you can ace the CBSE Class 12th board exam. GeeksforGeeks has compiled the complete notes
9 min read
Chapter 1: The Solid State
Difference between Crystalline and Amorphous SolidsA solid state is simply one of the states of matter. One of the many different states of matter is solid. Solids have a distinct volume, mass, and shape. Solids differ from liquids and gases in that they exhibit unique characteristics. Â These solid states or shapes depending on how the particles are
7 min read
Crystal Lattice and Unit CellIn crystalline solids, their constituent particles have a definite arrangement in three dimensions. The positions of these particles in the crystal relative to each other are usually represented by points. The dispensation of these unendurable sets of points is called a space lattice. The positions
7 min read
Calculate the Number of Particles per unit cell of a Cubic Crystal SystemWe are mostly surrounded by solids, which we use more frequently than liquids and gases. We require solids with a wide range of properties for various applications. These properties are determined by the nature of the constituent particles and the binding forces that exist between them. As a result,
5 min read
Close Packing in CrystalsIn the formation of crystals, the constituent particles (atoms, ions, or molecules) are closely intertwined. A tightly packed arrangement is one in which maximum available space is occupied by leaving minimum free space. This corresponds to the condition of the maximum possible density. The closer t
7 min read
Packing Efficiency of Unit CellA crystal lattice is made up of a relatively large number of unit cells, each of which contains one constituent particle at each lattice point. A three-dimensional structure with one or more atoms can be thought of as the unit cell. Regardless of the packing method, there are always some empty space
10 min read
Imperfections or Defects in a SolidMatter can exist in broadly three states named solids, liquids, and gases. Solids are those substances that have short intermolecular forces between them that keep molecules (atoms or ions) closely packed. They have definite mass, volume, and shape. Their intermolecular forces are strong and intermo
11 min read
Chapter 2: Solutions
What is a Solution?InSolutions are a part of our daily lives because they can be found in almost everything we use in our daily lives, such as soda, deodorant, sugar, salt, and so on. A solution is a type of mixture in which two or more substances combine to form a single solution; it can also be described as simple,
11 min read
SolubilitySolubility is a fundamental concept in chemistry that describes the ability of a substance to dissolve in a particular solvent under specific conditions to form a solution. A fluid may or may not dissolve completely in a fluid. Understanding the concept of solubility is essential in many fields of s
12 min read
Vapour PressureVapour pressure is the force exerted by a liquid's (or solid's) vapour above the surface of the liquid. At a particular temperature and thermodynamic equilibrium, this pressure is formed in a closed container. The rate of liquid evaporation is controlled by the equilibrium vapour pressure. The vapou
13 min read
Colligative PropertiesColligative Properties of any solution is the property of the solution that depends on the ratio of the total number of solute particles and the total number of solvent particles. Changing the moles or number of particles of solute or solvent changes the colligative properties of the solution. These
11 min read
Osmosis and Osmotic PressureA solution is a homogeneous mixture of two or more particles with particle sizes smaller than one nanometer. Sugar and salt solutions in water, as well as soda water, are common examples of solutions. In a solution, all of the components appear as a single phase. There is particle homogeneity, which
11 min read
Abnormal Molar MassesIn chemistry, abnormal molar masses occur when the molar masses are estimated and are higher or lower than the predicted value. The colligative qualities are used to calculate these. Elevation of boiling point, decreased relative vapour pressure, freezing point depression, and alleviation of osmotic
8 min read
Chapter 3: Electrochemistry
Chapter 4: Chemical Kinetics
Chapter 5: Surface Chemistry
Adsorption - Definition, Mechanism and TypesAdsorption is the adhesion of atoms, ions, or molecules to a surface from a gas, liquid, or dissolved solids. This process forms an adsorbate film on the adsorbent's surface. This differs from absorption, which occurs when a fluid dissolves or permeates a liquid or solid. Adsorption is a surface phe
7 min read
Adsorption vs AbsorptionAdsorption and Absorption are the two important processes of physical chemistry that help in various industrial processes to manufacture and purification of various chemical compounds. While the two terms sound almost similar there exists a significant difference between them. Adsorption is a surfac
10 min read
Catalysis - Definition, Mechanism, Types, CharacteristicsCatalysis in Chemistry is defined as the process in which the rate of the reaction is influenced by the presence of some specific substance. These specific substances are called Catalysts. The catalyst is never consumed during the chemical reaction. A catalyst changes the activation energy of the re
8 min read
ColloidsColloids or Colloidal Solution is a type of mixture in which insoluble components are suspended on a microscopic scale in some another component. Colloids are essential components in the daily lives of the common man, as we use or consume colloids and we even don't know. From Jellys to Mayonese to t
11 min read
Classification of ColloidsBefore we get into the specifics of how we classify colloids, it's important to first define what a colloid is. A colloid is a material made up of big molecules mixed with another substance in chemistry. This encompasses a wide range of items, many of which you may already have in your house, which
8 min read
Emulsions - Definition, Types, Preparation, PropertiesDid you know that "emulsion" comes from the Latin word "mulgeo," which meaning "to milk"? Milk is a fat-water emulsion containing a variety of additional ingredients. But what precisely are Emulsions, and what role do they play in our daily lives and in the workplace? Emulsions are combinations of t
10 min read
Chapter 6: General Principles and Processes of Isolation of Elements
Occurrence of Metals, Minerals and OresMetals are a crucial element of our existence, even if we don't realize it. Since the industrial era, we have had a heavy reliance on metals. From construction to jewellery, we use them for everything. But where do we acquire these metals from? Let us look into their occurrence. Before studying the
8 min read
What is meant by Concentration of Ores?Metals are found in ore in complexes with other elements. The process of removing metal from its ore is known as metal extraction. The methods of extracting metals from their ores and refining them are referred to as metallurgy. All of the metals cannot be extracted using a single process. Depending
8 min read
Occurrence and Extraction of MetalsMetals are minerals or substances that occur naturally beneath the Earth's surface. The majority of metals are lustrous or glossy. Metals are inorganic, which implies they were formed from non-living substances. Metals are typically found in the form of metal ores, which are linked to one another an
6 min read
Ellingham DiagramThe Gibbs equation enables us to predict the spontaneity of a process based on enthalpy and entropy measurements. The Ellingham diagram was developed by H.G.T. Ellingham to predict the spontaneity of metal oxide reduction. One of the most straightforward graphical representations of Thermodynamic st
7 min read
Oxidation and Reduction ReactionsOxidation and Reduction reactions are simply called Redox reactions. There are chemical reactions in which the oxidation number of the chemical species involved in the reaction changes. Oxidation and reduction Reactions involve a wide variety of processes. For example, oxidation-reduction reactions
8 min read
Methods of Refining of MetalsMinerals and ores abound in the earth's crust. Some ores have proven to be a valuable resource for humanity. Iron, for example, derived from iron ore (Hematite), laid the groundwork for the industrial revolution. Aluminium, on the other hand, was a critical strategic resource for aviation during Wor
7 min read
Uses of Aluminum, Copper, Zinc and IronThe earth's crust is abundant in minerals and ores. Some ores have proven to be a valuable resource for humanity. Iron, for example, derived from iron ore (Hematite), laid the groundwork for the industrial revolution. Aluminum, on the other hand, was a critical strategic resource for aviation during
8 min read
Chapter 7: The p-Block Elements
Group 15 elements - The Nitrogen FamilyThe contemporary periodic table, devised by Dimitri Mendeleev, lists all known elements according to their atomic number, which is unique to each element. The periodic table was created as a result of such an arrangement. The items with comparable qualities were grouped together in a column. Nitroge
6 min read
Dinitrogen - Definition, Preparation, Properties, UsesNitrogen is the lightest element in Periodic Table Group 15, also known as the pnictogens. Dinitrogen, a colourless and odourless diatomic gas with the formula N2, is formed when two atoms of the element join together at STP. Dinitrogen is the most abundant uncombined element, accounting for around
6 min read
Ammonia |Structure, Properties, Preparation, UsesAmmonia (NH₃) is a colorless gas with a sharp, pungent odor. It is a compound of nitrogen and hydrogen and plays a crucial role in both the industrial sector and biological processes. Let's learn about ammonia in detail, including its structure, properties and uses. AmmoniaAmmonia is nitrogen and hy
7 min read
Oxides of NitrogenNitrogen combines with oxygen to generate nitrogen oxides in a variety of forms. Its oxides have distinct oxidation states, ranging from +1 to +5. Nitrogen oxides with a greater oxidation state are more acidic than those with a lower oxidation state. Nitrogen Oxides are a combination of gases that i
9 min read
Allotropes of PhosphorusDespite the fact that people have been using the periodic table with phosphorus (P) in it for thousands of years, it was not until 1669 that it was isolated and named by a chemist named Brand. Phosphorus is an element that cannot be found naturally in our environment. It is highly reactive. Phosphor
5 min read
Phosphine - Structure, Preparation, Properties, UsesThe final electron of a P block element enters one of the three p-orbitals of the shell in which it is found. There are six groups of p-block elements since a p-subshell has three degenerate p-orbitals, each of which may hold two electrons. Because of their tendency to lose an electron, P block elem
5 min read
Phosphorus Halides - Structure, Properties, Uses, EffectsPhosphorus is required for life, mostly through phosphates, which are molecules that contain the phosphate ion. Phosphates are found in DNA, RNA, ATP, and phospholipids, which are all complex molecules that are required by cells. Phosphate was first found in human urine, and bone ash was a significa
8 min read
Oxoacids of PhosphorusOxoacids are acids that contain oxygen. Phosphorus is one such element that can be used to create a variety of oxoacids. H3PO4, H3PO3, and other common oxyacids The phosphorus atom is tetrahedrally surrounded by other atoms in phosphorus oxoacids. In general, it is obvious that these acids have at l
6 min read
ChalcogensChalcogens are the Group 16 elements of the modern periodic table consisting of 5 elements oxygen, sulphur, selenium, tellurium and polonium. The elements in this group are also known as chalcogens or ore-forming elements because many elements can be extracted from sulphide or oxide ores. The chalco
9 min read
Dioxygen - Definition, Properties, Preparation, UsesOxygen is a member of the periodic table's chalcogen group, a highly reactive nonmetal, and an oxidizing agent that readily forms oxides with most elements and other compounds. Oxygen is the most abundant element on Earth, and it is the third-most abundant element in the universe after hydrogen and
5 min read
Simple Oxides - Definition, Types, ExamplesOxides are binary chemicals generated when oxygen reacts with other elements. In nature, oxygen is extremely reactive. They create oxides when they react with metals and nonmetals. Based on their acid-base properties, oxides are classified as neutral, amphoteric, basic, or acidic. An acidic oxide is
5 min read
Ozone - Preparation, Properties, Uses, EffectsOzone is too reactive to stay in the atmosphere at sea level for long. It is formed from atmospheric oxygen in the presence of sunlight at a height of about 20 kilometres. This ozone layer shields the earth's surface from an excess of ultraviolet (UV) radiation. It is an unstable, blue, diamagnetic
7 min read
Allotropes of SulphurThe tenth most prevalent element in the universe is sulphur. It can also be found in the form of sulphide in a variety of meteorites. The existence of a sulphur element in molten, gaseous, and solid states gives the Jupiter moon lo its unusual colours. Sulphur is the sixth most prevalent element on
7 min read
Sulphur Dioxide - Structure, Preparation, Properties, UsesThe p-block, which spans groups 13 to 18, is located on the right side of the normal periodic table. Their electrical configuration is ns2 np1–6 in general. Despite being the first element in group 18, helium is not part of the p-block. Except for the first row, each row in the table has six p-eleme
8 min read
Oxoacids of SulphurOxoacids are oxygen-containing acids. Many oxoacids, such as H2SO4, H2SO3, and others, are known to be formed by sulphur. When sulphur is coordinated to oxygen, it forms a tetrahedral structure in oxoacids. Sulfur oxoacids are sulphur, oxygen, and hydrogen-containing chemical compounds. Sulfuric aci
6 min read
Sulfuric Acid - H2SO4Sulfuric Acid or Sulphuric Acid is a mineral acid consisting of one Sulfur, four Oxygen, and two Hydrogen atoms. The chemical or molecular formula of Sulfuric Acid is H2SO4. Sulfuric Acid is one most important commercially used chemicals. It is also known as Mattling acid or Hydrogen Sulfate or Vitr
8 min read
Group 17 Elements: The HalogensThe Halogens are the elements in the periodic table of Group 17 of the periodic table. Fluorine, chlorine, bromine, and iodine are examples of reactive nonmetals. Halogens are nonmetals that are extremely reactive. These elements have a lot in common in terms of properties. Group 17 elements are kno
8 min read
Chlorine (Cl)Chlorine is a chemical element that is represented by the symbol Cl. Chlorine is present in the 17th Group (Halogen Group) and 3rd Period of the Periodic table. Chlorine is the second lightest halogen that lies between Fluorine and Bromine in the halogen group. Chlorine is a yellow-green, pungent-sm
6 min read
Hydrogen Chloride - Definition, Preparation, Properties, UsesAs a hydrogen halide, the compound hydrogen chloride has the chemical formula HCl. It is a colourless gas at ambient temperature that emits white fumes of hydrochloric acid when it comes into contact with air-water vapour. In technology and industry, hydrogen chloride gas and hydrochloric acid are c
7 min read
Oxoacids of Halogens - Definition, Properties, StructureThe elements of Group 17 from top to bottom are fluorine, chlorine, bromine, iodine, and astatine. They are referred to as halogens because they create salt. This group's members are very similar to one another. They have a consistent pattern of physical and chemical features. The valence shell of e
7 min read
Interhalogen CompoundsThe p-block elements are known to be those elements in which the electron enters in one of the three orbitals of the p-block. There are 6 groups of p-block elements. The properties of p-block elements are that they are shiny and are good conductor of heat and electricity since they have free electro
6 min read
Group 18 Elements - Characteristics of Noble GasesThe group's members have eight electrons in their outermost orbit (except helium which has two electrons). As a result, they have a stable configuration. Group 18 elements are gases that are chemically unreactive, meaning they do not form many compounds. Be a result, the elements are referred to as
7 min read
Chapter 8: d- and f-Block Elements
Position of Elements in the Periodic TableThe elements in the middle of the periodic table, from Group 3 to 12, are referred to as d-block elements. The name d-block comes from the fact that the final electron enters the d-orbital of the penultimate shell. These are frequently referred to as transition elements because their properties fall
6 min read
Electronic Configuration of the d-block ElementsElectronic Configuration of the d-block elements are those that can be found in the contemporary periodic table from the third to the twelfth groups. These elements' valence electrons are located in the d orbital. d-block elements are sometimes known as transition elements or transition metals. The
7 min read
General Properties of Transition Elements (d-block)Elements with partially filled d orbitals are known as transition elements (sometimes known as transition metals). Transition elements are defined by IUPAC as elements with a partially full d subshell or elements capable of forming stable cations with an incompletely filled d orbital. In general, an
7 min read
Lanthanides - Definition, Configuration, PropertiesLanthanides are the contemporary periodic table's rare earth elements, with atomic numbers ranging from 58 to 71 after Lanthanum. Rare earth metals are so-called because these elements are extremely rare (3 × 10-4 % of the Earth's crust). As lanthanide orthophosphates, they are accessible in 'monazi
8 min read
Actinides - Definition, Properties, Formation, UsesThe d and f block mainly contains elements that include groups 3-12. The f block has elements in which 4f and 5f are progressively filled. These elements are placed below the periodic table in a separate table. The d and f block elements are majorly known as transition or inner transition elements.
9 min read
Some Applications of d and f-block ElementsTransition metals are typically characterized as elements with or capable of forming partially filled 'd' orbitals. Transition elements are d-block elements in groupings of three to eleven. Inner transition metals, which include the lanthanides and actinides, are another name for the f block element
6 min read
Chapter 9: Coordination Compounds