Alkyl Groups and Cyclic Hydrocarbons
Last Updated : 11 Nov, 2021
Organic compounds are compounds of carbon. Hydrocarbons are organic compounds that contain hydrogen and carbon. Petroleum, also known as crude oil, is the most important natural source of hydrocarbons. Saturated and unsaturated hydrocarbons are the two types of hydrocarbons. When hydrocarbons are arranged in the form of rings, they are called cyclic hydrocarbons. The saturated and unsaturated cyclic hydrocarbons are discussed further below. Also, the alkyl groups which are formed when one hydrogen atom is removed from a saturated hydrocarbon are also discussed below.
What are Saturated Hydrocarbons?
A saturated hydrocarbon is a hydrocarbon in which all of the carbon atoms are connected by a single bond. Alkanes are another name for saturated hydrocarbon. An alkane is a hydrocarbon with only a single covalent bond between the carbon atoms. In an alkane, there are no double or triple bonds. Methane, ethane, propane, and butane among others are the compounds known as alkanes.
Saturated hydrocarbons, or alkanes, have the general formula CnH2n+2, where n is the number of carbon atoms in one molecule of the alkane.
What are Unsaturated Hydrocarbons?
Unsaturated hydrocarbons are hydrocarbons in which the carbon atoms are connected by a double or triple bond. A double bond is formed when two carbon atoms share two pairs of electrons, whereas a triple bond is formed when three pairs of electrons are shared between two carbon atoms.
An alkene is an unsaturated hydrocarbon with two carbon atoms connected by a double bond. Alkene has the general formula CnH2n, where n is the number of carbon atoms in one molecule.
The simplest alkene will have two carbon atoms in the molecules since an alkene has only a double bond between two carbon atoms. There does not exist a single-carbon alkene. Ethene is the simplest alkene with two carbon atoms.
An alkyne is an unsaturated hydrocarbon with two carbon atoms connected by a triple bond. Alkyne has the general formula CnH2n-2 where n is the number of carbon atoms in one molecule of the alkyne.
The simplest alkyne will have two carbon atoms in the molecules since an alkyne has only a triple bond between two carbon atoms. There does not exist a single-carbon alkyne. Ethyne is the simplest alkyne with two carbon atoms. Hydrocarbons that are unsaturated are more reactive than saturated hydrocarbons. So alkenes and alkynes are often more chemically reactive than alkanes.
Alkyl Group
An alkyl group is formed when one hydrogen atom is removed from a saturated hydrocarbon (alkane). When this hydrogen is removed, the stem changes from -ane to -yl, indicating an alkyl group. Alkyl is a functional group of organic chemicals that is made up entirely of carbon and hydrogen atoms organized in a chain.
The methyl group (CH3-) and the ethyl group (C2H5-) are two examples of alkyl groups. The methyl group -CH3 is formed when one hydrogen is removed from methane, CH4. Similarly, removing one hydrogen atom from ethane (CH3CH3) results in the formation of an ethyl group -CH2CH3. They are not found on their own, instead, they are found attached to other hydrocarbons. The structural formulas of the methyl group and ethyl group are listed below.
Alkyl Groups The above free line (-) on the carbon atom of the alkyl group indicates that one valency of carbon atoms in the alkyl group is free. Some functional groups or other alkyl groups can be attached to this free valency of carbon. The general formula of an alkyl group is CnH2n+1 where n is the number of carbon atoms.
Cyclic Hydrocarbons
In addition to straight-chain and branched-chain hydrocarbons, some other hydrocarbons have carbon atoms arranged in a ring. Such hydrocarbons are called cyclic hydrocarbons.
The carbon chain of a cyclic hydrocarbon forms a ring. Saturated or unsaturated cyclic hydrocarbons can exist. Countless organic compounds exist in which a sequence of carbon atoms closes to form a ring rather than being connected in a chain. The saturated cyclic hydrocarbons and the unsaturated cyclic hydrocarbons are discussed further below.
Saturated Cyclic Hydrocarbons
Cycloalkanes are saturated hydrocarbons that contain only one ring. A cycloalkane is a cyclic hydrocarbon with single carbon-carbon bonds on all of its carbon atoms.
They have two fewer hydrogen atoms than an alkane with the same number of carbon atoms, with a general formula of CnH2n (n is an integer greater than 2). Cyclopropane (C3H6) is the simplest cycloalkane, with a three-carbon ring. Its extremely strained geometry makes it unstable and reactive, whereas cyclohexane (C6H12) is the most studied, best known, most important cycloalkane. Cycloalkane rings are commonly represented as polygons, with each corner corresponding to a carbon atom to which the required number of hydrogen atoms are attached to bring the total number of bonds to four.
The structural formula of cyclopropane Cyclic hydrocarbons' structural formulas can be represented in a number of ways, two of which are illustrated above. Each atom can be represented by the structure on the left in the diagram above. As shown in the triangle on the right, omitting the element symbols and only showing the shape is simple shorthand. The vertices of the triangle are thought to be carbon atoms. The most basic cycloalkane is cyclopropane and because of its highly strained geometry, it is quite unstable and reactive. Cyclohexane is a cycloalkane with six carbons. Larger cycloalkanes exist, but they are rare.
Unsaturated Cyclic Hydrocarbons
Unsaturated cyclic hydrocarbons are also possible. A cyclic hydrocarbon having at least one carbon-carbon double bond is known as a cycloalkene.
A cyclic hydrocarbon having at least one carbon-carbon triple bond is known as a cycloalkyne. Benzene is one of the most common cycloalkenes. A benzene molecule has six carbon atoms and six hydrogen atoms. There are three carbon-carbon double bonds and three carbon-carbon single bonds in this molecule. It also includes six single carbon-hydrogen bonds. Below are the structures of cyclohexene (C6H10) and benzene (C6H6).
Unsaturated hydrocarbons Cyclohexene (C6H10) is a flammable liquid with a distinctive odour. Due to the functionality of the double bond, which allows a wide range of chemistries to be applied and downstream intermediates and products to be derived from it, such as the epoxide, diol, and other useful downstream products, it is a reactive alkene that is used as a building block in several different markets.
Sample Questions
Question 1: Cyclopropane is said to be very reactive. Why?
Answer:
Cyclopropane has an extremely strained geometry which makes it unstable and reactive.
Question 2: What are aromatic hydrocarbons?
Answer:
The cyclic compounds which contain a single and a double bond at alternate positions and exhibit special properties are known as aromatic hydrocarbons.
Question 3: Identify which of the given compounds C5H10 and C6H6 is saturated cyclic hydrocarbons
Answer:
The general formula of saturated cyclic hydrocarbons is CnH2n where n is an integer greater than 2. For C5H10, n=5, and on putting n=5 in the general formula we get, C5H2(5) i.e., C5H10, which matches the given compound. So, it is a saturated cyclic hydrocarbon.
For, C6H6, n=6, and on putting n=6 in the general formula we get, C6H2(6) i.e., C6H12, which do not matches the given compound. So, it is not a saturated cyclic hydrocarbon.
Question 4: Give the formula of the alkyl group for the given compound C3H8.
Answer:
An alkyl group is formed when one hydrogen atom is removed from an alkane. The general formula of an alkyl group is CnH2n+1 where n is the number of carbon atoms. For the given compound C3H8, n=3, so putting n=3 in the general formula of the alkyl group, we get C3H2(3)+1 i.e., C3H7. Hence for the given compound, the formula of the alkyl group is -C3H7.
Question 5: Is the general formula of saturated cyclic hydrocarbons similar to any simple hydrocarbons?
Answer:
The general formula of saturated cyclic hydrocarbons is CnH2n where n is an integer greater than 2. Also, the general formula for an alkene is CnH2n, where n is the number of carbon atoms. So, the general formula of saturated cyclic hydrocarbons is similar to that of alkenes.
Similar Reads
CBSE Class 10 Chemistry Notes Class 10 Chemistry Notes by GeeksforGeeks have been developed as per the Latest pattern prescribed by CBSE for Class 10 Boards Exam 2021-22. In these revisions notes, all the important concepts and topics are covered Chapterwise. These notes are more useful as these are prepared according to the rev
5 min read
Chapter 1: Chemical Reactions and Equations
Characteristics of Chemical ReactionsA chemical reaction is a process in which reactants are converted into products. Chemical equations are used to illustrate chemical reactions. In a chemical reaction, the conversion of reactants into products results in some observable features known as characteristics of chemical reactions. The imp
5 min read
Types of Chemical ReactionsTypes of Chemical Reactions as the name suggests explores the classification of various types of chemical reactions based on different parameters. As we are surrounded by chemical reactions in our daily lives. From burning a match stick to making food all of the things and events in our lives involv
13 min read
Reactants and ProductsA chemical reaction takes place when the bonds between reactant molecules are broken and new bonds are established between product molecules, resulting in the creation of the new substance. Chemical Reactions: When two or more molecules combine to generate a new product, it is called a chemical reac
9 min read
Chemical Equations - Definition, Representation, TypesChemical reactions are the processes that result in the formation of new substances with new properties. Chemical reactions cause changes in the environment. A rearrangement of atoms occurs between the reacting components during chemical reactions, resulting in the formation of new compounds with fu
7 min read
How to Balance Chemical Equations?Balancing chemical equations is a fundamental skill in chemistry that ensures the law of conservation of mass is upheld in chemical reactions. It ensures that the same number of atoms of each element are present on both sides of the equation. How to Balance Chemical Equations? Before this, we need t
10 min read
Writing and Balancing Chemical EquationsA chemical reaction is a process in which the bonds within the reactant atoms are broken, and the substituent bonds within the product atoms are crystallized to crystallize a substituent. The method of representing a chemical reaction with the help of symbols and formulas of the substances involved
8 min read
Difference between Endothermic and Exothermic ReactionsChemical reactions on the heat involved are classified into two categories, Endothermic Reactions, and Exothermic Reactions. The difference between these reactions is that the first absorbs heat and the latter releases it. In this article, we will learn about endothermic reactions, exothermic reacti
8 min read
What are the Conditions required for a Chemical Reaction?A chemical equation is a representation of a chemical process in the form of symbols for the substances involved in the reaction. It's a way of depicting a chemical reaction with symbols and formulae for the components. The chemical equation can be more informative in the following three ways. By ch
8 min read
Writing and Balancing Chemical EquationsA chemical reaction is a process in which the bonds within the reactant atoms are broken, and the substituent bonds within the product atoms are crystallized to crystallize a substituent. The method of representing a chemical reaction with the help of symbols and formulas of the substances involved
8 min read
Oxidizing and Reducing AgentsA process in which one or more reactants combine together to form one or more different substances, called products. The forming substances are called chemical elements or compounds. A chemical reaction results in the rearrangement of the constituent atoms of the reactants to result in the formation
10 min read
Decomposition ReactionHave you ever wondered what happens when compounds break apart into simpler substances? Or how energy is released, and new compounds are formed? The answers to these questions lie in the concept of Decomposition Reaction. Decomposition Reactions are a key concept in the understanding of the chemical
7 min read
Effects of Oxidation Reactions in Everyday LifeThe addition of an oxygen atom to a compound is referred to as oxidation. This process's inverse is known as reduction and involves the removal of an electron. Biological oxidation is a biological process in which electrons are lost, as opposed to reduction, which involves the gain of electrons. How
9 min read
Corrosion and RancidityChemical reactions may be found everywhere around us, from our bodies' food metabolism to how the light we receive from the sun is produced through chemical reactions. It's crucial to understand physical and chemical changes before starting with chemical reactions. The best example of physical and c
15+ min read
What is Rancidity and How to prevent them?We've noticed that if we store any food item at room temperature for an extended period of time, it goes stale. It is caused by the oxidation of food when it comes into contact with air, which causes it to smell and taste bad. It can be avoided by following a few precautions, such as keeping food in
7 min read
Chapter 2: Acids, Bases, and Salts
Acids, Bases and SaltsAcids, Bases, and Salts are the main chemical compounds that exist in our surroundings. Acids, Bases, and Salts are compounds that occur naturally and can also be created artificially. They are found in various substances including our food. Vinegar or acetic acid is used as a food preservative. Cit
15+ min read
Chemical Indicators - Definition, Types, ExamplesChemical Indicators in Acids, Bases, and Salts are defined as the chemical substances that are used to indicate whether a liquid is an acid or base. All the solutions (liquids) around us can be categorized into three categories that are, Acidic, Basic, Or Neutral. The chemical substances that are us
9 min read
Difference between Mineral Acids and Organic AcidsAcids are organic substances with acidic characteristics. Acid is also a chemical species that may react with a base to create salt and water. Strong acids and weak acids are the two primary kinds of acids. Depending on their chemical makeup, acids can alternatively be classified as mineral acids or
5 min read
Strength of AcidsAcids are a molecule or other species which can donate a proton or accept an electron pair in reactions. When acids react with H2O, they create hydrogen ions; the strength of an acid is determined by the concentration of hydrogen ions in a solution. A higher number of hydrogen ions indicates that th
6 min read
Concentrated and Dilute AcidsA Lewis acid is a molecule or ion that is capable of either donating a proton (H+) or forming a covalent bond with an electron pair. The proton donors, also known as Bronsted–Lowry acids, are the first type of acid. Proton donors in aqueous solutions form the hydronium ion H3O+ and are known as Arrh
8 min read
Properties of Acids - Definition, Examples, Properties, UsesAcids have a corrosive effect. When we cook acidic foods in brass or copper utensils, the metal reacts and corrodes. When copper reacts with acid, it creates copper salt. Copper salts are toxic and taint the flavour of cooked food. This is why we don't keep liquid foods in metallic containers. Tea s
6 min read
What do all Acids have in Common?The substance found around us whether it be food items, medicines, fertilizers, etc are categorized into three groups acids, bases, and salts. The given article deals with the study of common properties all the acids have. Before jumping into the discussion, one must know about acids and bases so a
4 min read
Are all compounds that contain hydrogen not an acid?Acids and bases play an important role in our lives and the environment around us, from our bodies to our planet's oceans and rocks. You've encountered acids and bases if you've ever tasted lemon juice or washed your hands with soap. Scientists categories substances as acids, bases (also known as al
5 min read
Uses of Mineral Acids in IndustriesHumphry Davy made a significant contribution to the modern acid-base concept in 1815 by demonstrating that hydrogen is an essential constituent of acids. Around the same time, Joseph Louis Gay-Lussac came to the conclusion that acids are substances that can neutralise bases and that these two classe
6 min read
Difference between Alkalis and BasesAn alkali is a basic ionic salt of an alkali metal or an alkaline earth element in chemistry. A base that dissolves in water is also known as an alkali. The pH of a soluble base solution is more than 7.0. In English, the adjectives alkaline and alkalescent are frequently used as synonyms for basic,
6 min read
What do All Bases Have in Common?Acids and bases are two of the most significant groups of chemicals in chemistry. Several characteristics are shared by all acids: They all have a sour flavour and react with most metals to produce hydrogen gas (H2) and baking soda to produce carbon dioxide (CO2). Because acids create ions when diss
4 min read
Strong and Weak BasesThe citric acid in fruits like oranges and lemons, tartaric acid in tamarind, malic acid in apples, lactic acid in milk and milk products, and hydrochloric acid in gastric juices are just a few examples of acids and bases found in nature. Many bases, such as lime water, can also be found. Many of th
7 min read
Acids and BasesAn acid is a substance that is capable of donating a proton (hydrogen ion) to another substance. A base is a molecule able to donate OH- ion/strong>. Acidic substances are usually identified by their sour taste. Acids have a sour taste and are corrosive i.e. exposure to acid on human skin can cau
12 min read
Importance of pH in Everyday LifeAcids, bases, and salts have an impact on chemistry as well as our daily lives. Acids have a sour flavour (the word acid comes from the Latin word ‘acere’ which means ‘sour’), bases have a bitter taste, while salts themselves have a salty taste. Citric acid is found in fruits such as oranges and lem
13 min read
Explain the pH Change As the Cause Of Tooth DecayCitric acid may be found in citrus fruits like oranges and lemons, tartaric acid in tamarind, malic acid in apples, lactic acid in milk and milk products, and hydrochloric acid in stomach secretions. Many bases, such as lime water, are also available. Many of these acids are utilised in our daily li
6 min read
Importance of pH in Everyday LifeAcids, bases, and salts have an impact on chemistry as well as our daily lives. Acids have a sour flavour (the word acid comes from the Latin word ‘acere’ which means ‘sour’), bases have a bitter taste, while salts themselves have a salty taste. Citric acid is found in fruits such as oranges and lem
13 min read
What is meant by Family of Salts?We have a good understanding of acids and bases in modern chemistry (also called alkalis). Acids and bases are utilised as laboratory reagents, industrial catalysts, culinary additives, and cleaning products, and they pervade our life from the laboratory to the kitchen. However, it took centuries fo
8 min read
Acidic, Basic and Neutral SaltsA salt is crystallized by the reaction between an acid and a base, accordingly, we should anticipate that the salt solution in water is neutral to the acid test. Although aqueous solutions of numerous mariners are neutral (pH of 7), some salts deliver acidic or introductory results (alkaline solutio
6 min read
What is Sodium Chloride? - Definition, Preparation, Properties, UsesSalt's chemical name is sodium chloride. Sodium is an electrolyte that regulates your body's water content. Sodium is also involved in nerve impulses and muscle contractions. Sodium chloride is a medication used to treat or prevent sodium loss caused by dehydration, excessive sweating, or other fact
6 min read
Bleaching PowderBleaching Powder, also called Calcium Hypochlorite or Calcium Oxychloride, is a chemical compound which is used for various purposes. It has various uses but it is majorly used for its bleaching action, the bleaching action of Bleaching Powder is used to bleach clothes in laundries, and others. Blea
6 min read
Cleansing Action of Soaps and DetergentsIn our day to day lives, we often use detergents and soaps to clean the dirt off our clothes. Have you ever wondered what soap molecule is made up of or how it cleanses the dirt? In this article, we shall look upon the structure of soap and its cleansing action but before that, we shall give a simpl
6 min read
Water of CrystallizationCrystallization is a technique for separating solids from a solution or, to put it another way, a procedure for purifying things. This is the most frequent method for purifying seawater. Some salts have a few water molecules in their crystal structure as an essential component. The water of crystall
10 min read
Chapter 3: Metals and Non-Metals
Metals and Non-MetalsAll the elements around us are categorised into three categories metals, non-metals and metalloids. Thus we can say that all the elements in the periodic table are divided into these three categories. Metals and Non-metals are two types of substances that may be distinguished by their physical and c
8 min read
Exceptions in Physical Properties of Metals and Non-MetalsOur surrounding is all build-up by various elements and compounds. The composition of elements makes various substances. Now, when we see these building blocks that are elements are further categorized into the groups of metals and non-metals. These elements are differentiated on the basis of their
5 min read
Difference between Metals and Non-MetalsElements are chemically occurring natural substances that may be found in a free state or combined state. They are extracted from ores. ores are found deep inside the earth's crust. The ores from which metals can be easily extracted are called minerals. By the definition of minerals, metals can be e
7 min read
Reactivity Series - Reactivity of Metals, Features, TricksReactivity Series is an arrangement of metals from highest to lowest reactivity order. Therefore, the term "reactivity series" refers to a series of metals arranged in descending order of reactivity. It is also known by the name "activity series." Reactivity Series Let's understand about Reactivity
6 min read
Uses of Metals and Non-MetalsWe utilise a variety of well-known materials in our daily lives, including iron, aluminium, copper, gold, silver, and many more. We are also familiar with elements such as oxygen, carbon, and sulphur. All of them are derived from naturally occurring substances that contain one or more elements or co
10 min read
Noble GasInert gases are chemically unreactive. Noble gases, also termed inert gases are group 0 elements. There are six types of noble gases, helium (He), neon (Ne), argon (Ar), krypton (Kr), xenon (Xe), and radioactive radon (Rn). The noble gases are the type of elements belonging to group 18. Under standa
4 min read
What are the causes of Chemical Bonding?Noble gases are chemically inert, and their electron arrangements are extremely stable, preventing the outermost electrons from participating in chemical reactions. In the outermost shell of an atom of a noble gas, there are eight electrons. The number of outermost electrons is just two in the case
11 min read
Types of Chemical BondingTypes of Chemical Bonds as the name suggest explore the different types of chemical bonds which exist and form in the domain of chemistry. Bons such as Ionic, Covalent, Hydrogen, and Metallic include polar and non-polar bonds. Understanding these bonds is necessary as without knowing how these bonds
15+ min read
Ionic Bonds and Ionic CompoundsMetals are minerals or substances that naturally occur beneath the Earth's surface. The majority of metals are glossy or gleaming. Metals are inorganic, meaning they are formed of materials that have never been alive. Metals are natural components of the earth's crust that are present in the form of
7 min read
Covalent Bonds - Definition, Types, Properties, ExamplesThe matter is portrayed as any substance that has mass and devours space by having a volume in old-style material science and general science. Step by step fights that can be reached are ultimately contained atoms, which are involved in working together subatomic particles, and matter implies partic
8 min read
What are Covalent Compounds? Definition, Formation, PropertiesPure substances exist in two forms: elements and compounds. Elements are the simplest chemical substances in which all of the atoms are the same. Compounds are chemical substances composed of two or more elements chemically bound together in a specific ratio. When two or more elements combine chemic
6 min read
Properties of Ionic and Covalent CompoundsIn this universe, there are three types of compounds found – Ionic compounds, Covalent compounds and Coordinate compounds. Out of these three, the most prevalent ones are the ionic and covalent compounds. Ionic compounds are formed between two elements by transfer of one or more electrons between th
7 min read
Occurrence of Metals, Minerals and OresMetals are a crucial element of our existence, even if we don't realize it. Since the industrial era, we have had a heavy reliance on metals. From construction to jewellery, we use them for everything. But where do we acquire these metals from? Let us look into their occurrence. Before studying the
8 min read
Extraction of Metals from OresThe matter is characterized as any substance that has mass and consumes space by having a volume in old-style material science and general science. Day by day protests that can be contacted are eventually comprised of molecules, which are comprised of collaborating subatomic particles, and matter al
10 min read
Concentration of Ore - Definition, Methods of Separation, ExamplesMetals are found in ore in the form of compounds with other elements. Metal extraction is the process of extracting metal from its ore. The techniques for extracting metals from their ores and refining them are referred to as metallurgy. There is no single procedure that can extract all of the metal
7 min read
Conversion of Ore into MetalMetals are minerals or substances that form naturally beneath the Earth's surface. Metals are inorganic, which means they were formed from non-living substances. Metals are natural compounds of the earth's crust that are found in the form of metal ores and are associated with each other as well as m
6 min read
Extraction of Highly Reactive MetalsA category of metal elements known as reactive metals can react with acids, water, mineral acids, and severe oxidising acids. The activity or reactivity series, which ranks the most reactive metals from highest to lowest, can be used to identify this group. The reactivity of metals increases and los
6 min read
Extraction of Moderately and Less Reactive MetalsMetal can be found in ore in the form of a combination with other elements. As a result, once the ore has been extracted from the ground, it must be converted into pure metal. Metal extraction is the process of extracting metal from its ore. A number of steps are used to transform ores into free met
8 min read
What is Refining of Metals?In metallurgy, refining is extremely important. In nature, any metal that has been taken from its ore is usually impure. Crude metal refers to the impure metal that is removed. Refining is the process of eliminating impurities from metals in order to achieve high-purity metals. Impurities are remove
7 min read
What is Corrosion?Chemical reactions may be found everywhere around us, from our bodies' food metabolism to how the light we receive from the sun is produced through chemical reactions. It's crucial to understand physical and chemical changes before starting with chemical reactions. The best example of physical and c
11 min read
Corrosion of MetalsIf metal is reactive, its surface may be attacked slowly by air and moisture in the atmosphere. The metal reacts with the oxygen and water vapour of air forming compounds on its surface. The formation of these compounds tarnishes the metal. The compounds formed on the surface of the metal gradually
8 min read
Platinum - Definition, Occurrence, Properties, ApplicationsPlatinum and its alloys are essential in the chemical laboratory for electrodes, crucibles, and dishes in which materials can be heated to high temperatures. Platinum is one of the most prevalent platinum metals. Because platinum resists both the high temperatures and chemical attack of electric arc
6 min read
Chapter 4: Carbon and its Compounds
CarbonCarbon is a chemical element with the symbol C and atomic number 6. The name of Carbon is derived from the Latin word Carbo meaning 'coal'. Carbon is a nonmetallic and tetravalent atom, i.e. it forms four covalent bonds with other atoms. Carbon accounts for only about 0.025% of the Earth's crust. Ca
8 min read
Why does Carbon Always Form Covalent Bonds?As carbon plays such an important role in living organisms' chemistry, all are carbon-based. This suggests that carbon atoms, bound to other carbon atoms or other elements, are the basic building blocks of many, if not all, of the compounds, found only in living beings. Other atoms play vital roles
6 min read
Why is Carbon considered Tetravalent?Carbon, like hydrogen, oxygen, lead, and any other element in the periodic table, is a chemical element. Carbon is an abundant element. Diamonds and graphite are examples of pure or almost pure carbon, although they may also mix with other elements to form molecules. Humans, animals, plants, trees,
5 min read
Allotropes of CarbonAllotropes of Carbon are the forms of carbon that have different structures and properties. Allotrope is the phenomenon in which an element can exist in more than one physical state. The well-known allotropes of carbon are Diamond and Graphite. Various other allotropes of carbon are explained in the
8 min read
Diamond and Graphite - Structure, Uses, Properties, ApplicationsDiamond and Graphite- The word "carbon" comes from the Latin word "carbo," which means "charcoal." It is the fourth most plentiful element in the universe and the second most abundant element in human bodies, which may come as a surprise to us (the first being oxygen). In reality, all organic substa
8 min read
What is Catenation and Tetravalency?Carbon is a non-metallic element. Carbon is found in very small amounts in the earth's crust and atmosphere. Even though there is just a limited amount of carbon in nature, the carbon atom is extremely important in many aspects of life. We, as well as all living things, plants, and animals, are made
6 min read
What are Hydrocarbons?Alkanes and cycloalkanes are hydrocarbons with no double or triple bond functional groups, depending on whether the carbon atoms of the molecule are organized in chains or rings. Alkenes and alkynes are hydrocarbons with double or triple bonds, respectively. The following mentioned are the rules for
11 min read
Saturated and Unsaturated HydrocarbonsCarbon compounds are referred to as organic compounds. Most organic compounds contain hydrogen, and many organic compounds contain oxygen or other elements in addition to carbon. As a result, the vast majority of organic compounds are hydrocarbons, which contain only hydrogen and carbon. Let's talk
6 min read
Alkyl Groups and Cyclic HydrocarbonsOrganic compounds are compounds of carbon. Hydrocarbons are organic compounds that contain hydrogen and carbon. Petroleum, also known as crude oil, is the most important natural source of hydrocarbons. Saturated and unsaturated hydrocarbons are the two types of hydrocarbons. When hydrocarbons are ar
7 min read
Functional GroupsFunctional Groups if added to hydrocarbons change their functionality and properties. A hydrocarbon is a compound made up of hydrogen and carbon, which can be either saturated or unsaturated. A saturated hydrocarbon is one in which the carbon atoms are joined by only a single bond and an unsaturated
10 min read
Chemical Properties of Carbon CompoundsHydrocarbons are the most abundant carbon compounds such as alkanes, alkenes, and alkynes. We'll now discuss some of the chemical properties of hydrocarbons, which are carbon compounds. Combustion reactions, substitution reactions, and addition reactions are the chemical properties that will be disc
9 min read
Hydrogenation of OilsThe process of hydrogenation involves an addition reaction. Hydrogenation is adding hydrogen to an unsaturated hydrocarbon to obtain a saturated hydrocarbon. The addition reaction is one of carbon's chemical properties. Only unsaturated hydrocarbons (alkenes and alkynes) give the addition reactions.
5 min read
EthanolEthanol also called Ethyl Alcohol is a commercially important organic compound. It is the second member of the alcohol family and is used for a variety of purposes. It is sometimes also called Alcohol and it is used by humans for consumption. Ethanol is also represented as, EtOH. Ethanol is the IUPA
9 min read
Cleansing Action of Soaps and DetergentsIn our day to day lives, we often use detergents and soaps to clean the dirt off our clothes. Have you ever wondered what soap molecule is made up of or how it cleanses the dirt? In this article, we shall look upon the structure of soap and its cleansing action but before that, we shall give a simpl
6 min read
Difference Between Soap and DetergentSoaps and Detergents are cleaning agents that are used to remove dirt and other undesirable particles from the human body, its clothes, and other surfaces. Both soap and detergents are used for cleaning action but there are quite differences between them, and the differences between them if discusse
7 min read
Chapter 5: Periodic Classification of Elements
Dobereiners Triads - Definition, Types, LimitationsSince ancient times, there have been various attempts to classify the elements into groups according to their properties. As the new elements were discovered, a number of theories came up to classify the elements. Various scientists used various approaches and facts to justify their classification.
5 min read
Newland’s Law of OctavesNewland's Law of Octaves also called Law of Octaves was one of the initial attempts to arrange all the known chemical elements in a table to make their study better. In Newland's Law of Octaves, elements are arranged in the increasing order of their atomic mass and it is seen that the property of th
6 min read
Classification of ElementsPeriodic categorization of elements is a way of grouping elements based on their characteristics, such as keeping elements that are similar in one group and the rest of the elements in the other. The elements are grouped in the long-form periodic table in order of their atomic numbers. The atomic nu
8 min read
Mendeleev Periodic TableMendeleev's Periodic Table was the first bold attempt to arrange all the known elements in a proper manner. This table was based on the principle of Mendeleev’s Periodic Law and was a significant step made in the direction of arranging all the known elements. According to Mendeleev, the characterist
9 min read
Merits of Mendeleev’s Periodic TableThe study of a huge number of elements is condensed into a few groups of elements, with elements belonging to the same group sharing similar properties. The known elements were classified using Dobereiner's Triads, Newland's law of octaves, and Mendeleev's periodic table. The periodic table of Mende
5 min read
Anomalies of Mendeleev’s Periodic TableThe study of a large number of elements is reduced to a few groups of elements if all the elements are divided into a few groups, in such a way that elements in the same group have similar properties. Dobereiner's Triads, Newland's law of octaves, Mendeleev's periodic table all helped to classify th
7 min read
Modern Periodic LawAll matter in our environment is made up of basic units known as elements. Initially, only 31 chemical elements were discovered in 1800 and it was easier to study their chemical and other properties. However, as more and more elements were discovered due to technological advancements in science, it
6 min read
Periodic Table of ElementsThe Periodic table of elements is a systematic arrangement of 118 known chemical elements. These chemical elements are organized in order of increasing atomic number. The horizontal rows from left to right are called periods while the vertical columns from top to bottom are called groups in a period
5 min read
Characteristics of the Periods and Groups of the Periodic TableThe physical and chemical properties of elements in the modern periodic table exhibit a consistent variation throughout periods and groups. Several properties of elements, such as the number of valence electrons, valency, atom size, and metallic character, vary as you move from left to right in a pe
11 min read
Merits of the Modern Periodic TableChemists have always tried to arrange the elements in a way that reflects the similarities in their properties. The elements in the modern periodic table are listed in order of increasing atomic number (the number of protons in the nucleus of an atom). Previously the scientists tried to arrange the
8 min read